On 11/11/11, Dave Shield <[email protected]> wrote:
> On 11 November 2011 13:55, Waqas Ahmed Khan <[email protected]> wrote:
>>                      The problem is
>> this that net-snmp is detecting my ipv6 based windows and linux machines.
>> but it is not detecting my CISCO routers and switches.
>
>
>> But for CISCO Router it always gives this error:
>>
>> # snmpstatus -v2c -c PxxTC udp6:[24xx:fcxx:8xxx:2xx::2]:161
>> Timeout: No Response from udp6:[24xx:fcxx:8xxx:2xx::2]:161
>
> These may be obvious questions, but:
>    - does the Cisco box support SNMP access over IPv6?
>    - if so, is this support enabled?    (either by default, or explicitly)

It isn't enabled by default.  You need to do something like

ipv6 access-list v6any
 permit ipv6 any any

snmp-server community public RO ipv6 v6any
snmp-server community private RW ipv6 v6any

See
http://www.cisco.com/en/US/docs/ios/ipv6/command/reference/ipv6_16.html#wp2685059

Regards,
Lee

------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users

Reply via email to