New update:
I have put all incoming requests in an active request list to avoid querying
the device multiple times for one request.
However:
If I am using a delayed time of more than 7 seconds, I get a timeout from the
master agent and my subagent gets disconnected.
AgentX master disconnected us, reconnecting in 15
NET-SNMP version 5.7.1 AgentX subagent connected
/var/log/net-snmp.log
Connection from UDP: [127.0.0.1]:47426->[127.0.0.1]:161
agentx/master: agentx master handler starting, mode = 0xa0
agentx/master: request for variable (SNMPv2-SMI::enterprises.49463.1.3.40.0)
agentx/master: sending pdu (req=0x17d,trans=0x17c,sess=0x6b)
agentx_build: packet built okay
Connection from UDP: [127.0.0.1]:47426->[127.0.0.1]:161
agentx/master: agentx master handler starting, mode = 0xa0
agentx/master: request for variable (SNMPv2-SMI::enterprises.49463.1.3.40.0)
agentx/master: sending pdu (req=0x17f,trans=0x17e,sess=0x6b)
agentx_build: packet built okay
agentx_build: packet built okay
Connection from UDP: [127.0.0.1]:47426->[127.0.0.1]:161
agentx/master: agentx master handler starting, mode = 0xa0
agentx/master: request for variable (SNMPv2-SMI::enterprises.49463.1.3.40.0)
agentx/master: sending pdu (req=0x181,trans=0x180,sess=0x6b)
agentx_build: packet built okay
agentx_build: packet built okay
agentx_build: packet built okay
agentx_build: packet built okay
agentx_build: packet built okay
agentx_build: packet built okay
Connection from UDP: [127.0.0.1]:47426->[127.0.0.1]:161
agentx/master: agentx master handler starting, mode = 0xa0
agentx/master: request for variable (SNMPv2-SMI::enterprises.49463.1.3.40.0)
agentx/master: sending pdu (req=0x183,trans=0x182,sess=0x6b)
agentx_build: packet built okay
agentx_build: packet built okay
agentx_build: packet built okay
agentx_build: packet built okay
agentx_build: packet built okay
Connection from UDP: [127.0.0.1]:47426->[127.0.0.1]:161
agentx/master: agentx master handler starting, mode = 0xa0
agentx/master: request for variable (SNMPv2-SMI::enterprises.49463.1.3.40.0)
agentx/master: sending pdu (req=0x187,trans=0x186,sess=0x6b)
agentx_build: packet built okay
agentx_build: packet built okay
agentx/master: timeout on session 0x7f6ecc8ceb10 req=0x17d
agentx/master: close 0x7f6ecc8ceb10, -1
agentx/master: Continue removing delegated subsession reqests
agentx/master: close transport
agentx/master: response too late on session 0x7f6ecc8ceb10
agentx/master: response too late on session 0x7f6ecc8ceb10
agentx/master: response too late on session 0x7f6ecc8ceb10
agentx/master: response too late on session 0x7f6ecc8ceb10
agentx/master: response too late on session 0x7f6ecc8ceb10
----- Original Message -----
Fra: "Sverre Moe" <[email protected]>
Til: [email protected]
Sendt: 31. oktober 2012 14:23:00
Emne: Re: Delayed response
Update:
Running: snmpget -v2c -c public localhost 1.3.6.1.4.1.49463.1.3.40.0
This is the frequency my handle_snmp and delayed_response gets called.
handle_snmp
handle_snmp
handle_snmp
handle_snmp
handle_snmp
handle_snmp
delayed_response
handle_snmp
handle_snmp
handle_snmp
delayed_response
delayed_response
handle_snmp
delayed_response
delayed_response
delayed_response
handle_snmp
delayed_response
delayed_response
delayed_response
delayed_response
delayed_response
The response are sent to the requester(snmpget) at line 7(the first
delayed_response). Why does both the handler method and my delayed callback get
called so many times. Delayed time is set to 3 seconds. If I also sends two
snmpget at the same time, this output gets jumbled for each call. Is there a
way to have some sort of synchronization on the handler. Can I have new calls
to wait until the current one has been dispatched?
/Sverre
----- Original Message -----
Fra: "Sverre Moe" <[email protected]>
Til: [email protected]
Sendt: 30. oktober 2012 15:01:19
Emne: Delayed response
Is registering an Net-SNMP alarm the only way to delay a response?
I don't need to delay for a given amount of time, but until a signal is
received (sigc signal). Anyway I could do that?
If not, the only possible way I see to get around this is to use an alarm with
a timeout delay. Wait for 5-10 seconds, check if signal is received and data
ready and then send it to the requester, if not send error
SNMP_ERR_RESOURCEUNAVAILABLE .
My code for the delayed handler. I doesn't work if I keep the
snmp_alarm_register inside the for-loop. Why is that? It will fail on the line
with " if (!cache) { ".
Also, somehow handle_snmp gets called 4 times when delayed 1 second, 9 times
for 2 seconds, 14 times for 3 seconds. I can't have that. Inside my
if-statement in the for-loop I call my device to get the information for the
request, I cannot call this so many times for one only request.
[CODE]
int
handle_snmp(netsnmp_mib_handler *handler,
netsnmp_handler_registration *reginfo,
netsnmp_agent_request_info *reqinfo,
netsnmp_request_info *requests) {
const oid* request_oid = (*reginfo).rootoid;
map<oid_wrapper, scalar>::iterator scalar_iterator;
for (scalar_iterator = scalars.begin();
scalar_iterator != scalars.end();
scalar_iterator++) {
const oid_wrapper oid_wrapper = (*scalar_iterator).first;
const scalar _scalar = (*scalar_iterator).second;
const oid* oid_value = oid_wrapper.get_oid();
const int oid_length = oid_wrapper.get_length();
if (netsnmp_oid_equals(oid_value, oid_length, request_oid, oid_length) == 0) {
cout << "We got here..." << endl;
requests->delegated = 1;
snmp_alarm_register(1,
0,
delayed_response,
(void *)
netsnmp_create_delegated_cache(handler,
reginfo,
reqinfo,
requests,
NULL));
} else {
netsnmp_set_request_error(reqinfo,
requests,
SNMP_ERR_RESOURCEUNAVAILABLE);
}
}
return SNMP_ERR_NOERROR;
}
void
delayed_response(unsigned int clientreg, void *clientarg) {
netsnmp_delegated_cache *cache = (netsnmp_delegated_cache *) clientarg;
netsnmp_request_info *requests;
netsnmp_agent_request_info *reqinfo;
cache = netsnmp_handler_check_cache(cache);
if (!cache) {
snmp_log(LOG_ERR, "illegal call to return delayed response\n");
return;
}
reqinfo = cache->reqinfo;
requests = cache->requests;
void* datapointer;
char buffer[2048];
int dataint;
int length = 0;
u_char type;
strcpy(buffer, "Testing delayed SNMP");
datapointer = buffer;
length = strlen(buffer);
type = ASN_OCTET_STR;
requests->delegated = 0;
switch(reqinfo->mode) {
case MODE_GET:
snmp_set_var_typed_value(requests->requestvb,
type,
datapointer,
length);
break;
default:
snmp_log(LOG_ERR, "unknown mode (%d) in delayed_response\n", reqinfo->mode );
}
netsnmp_free_delegated_cache(cache);
}
[/CODE]
CONFIDENTIALITY
This e-mail and any attachment contain KONGSBERG information which may be
proprietary, confidential or subject to export regulations, and is only meant
for the intended recipient(s). Any disclosure, copying, distribution or use is
prohibited, if not otherwise explicitly agreed with KONGSBERG. If received in
error, please delete it immediately from your system and notify the sender
properly.
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_sfd2d_oct
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
CONFIDENTIALITY
This e-mail and any attachment contain KONGSBERG information which may be
proprietary, confidential or subject to export regulations, and is only meant
for the intended recipient(s). Any disclosure, copying, distribution or use is
prohibited, if not otherwise explicitly agreed with KONGSBERG. If received in
error, please delete it immediately from your system and notify the sender
properly.
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_sfd2d_oct
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
CONFIDENTIALITY
This e-mail and any attachment contain KONGSBERG information which may be
proprietary, confidential or subject to export regulations, and is only meant
for the intended recipient(s). Any disclosure, copying, distribution or use is
prohibited, if not otherwise explicitly agreed with KONGSBERG. If received in
error, please delete it immediately from your system and notify the sender
properly.
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_sfd2d_oct
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
