It did indeed work, no issues.
Thanks.
-Chris Bartram
"The purpose of life is not to be happy. It is to be useful, to be honorable,
to be compassionate, to have it make some difference that you have lived and
lived well". (Ralph Waldo Emerson)
>________________________________
> From: Fredrik Björk <f...@skulle.se>
>To: Chris Bartram <chrisrbart...@yahoo.com>
>Cc: "net-snmp-users@lists.sourceforge.net"
><net-snmp-users@lists.sourceforge.net>
>Sent: Thursday, April 18, 2013 2:47 AM
>Subject: Re: SNMPv3 installation - need to also allow SNMPv1 readers
>
>
>
>Hi!
>
>First of all the obvious: is the manager REALLY coming from IP
192.168.1.50 when the packets hit the RHEL box? No NAT in between?
No dual NICs or IPs? Just to make sure:
>
>tcpdump -nnvv -c 10 port 161
>
>Then try to access the RHEL box with SNMP from the manager. If
source IP is really 192.168.1.50 we can proceed...
>
>Try adding this:
>
>
>com2sec ita 127.0.0.0/8 ITACommunity
>Restart the snmpd service and do this (on the RHEL box):
>
>snmpwalk -v 1 -c ITACommunity 127.0.0.1
>snmpwalk -v 1 -c ITACommunity 127.0.0.1 enterprises
>
>This will make the RHEL attempt to access its own snmp stack over
the loopback interface. If you don't get any response, well then
we have to go figure why!
>
>I'm not an expert in snmpd.conf but I think you get the idea here.
>
>/Fredrik
>
>On 2013-04-18 00:48, Chris Bartram wrote:
>
>
>>
>>I have a working SNMPv3 installation (NET-SNMP version 5.3.2.2 on RHEL5:) but
>>find we must also allow SNMPv1 gets from another tool (Dell OpenManage
>>Essentials) which doesn't support SNMPv3.
>>
>>
>>Below is what Dell recommends using in the standard snmpd.conf file; I tried
>>adding this to my existing snmpd.conf and (not surprisingly) it didn't
>>work...
>>
>>
>># sec.name source community
>>com2sec ita 192.168.1.50 ITACommunity
>>
>># group.name sec.model sec.name
>>group itagroup v1 ita
>>group itagroup v2c ita
>>
>># name incl/excl subtree mask(optional)
>>view all included .1
>>
>># group.name context sec.model sec.level prefix read
>>write notif
>>access itagroup "" any noauth exact all
>>all none
>>
>># Added for support of bcm5820 cards.
>>pass .1.3.6.1.4.1.4413.4.1 /usr/bin/ucd5820stat
>>
>># Send traps to the ita box.
>>trapsink 192.168.1.50 ITACommunity
>>
>># Allow Systems Management Data Engine SNMP to connect to using SMUX
>>smuxpeer .1.3.6.1.4.1.674.10892.1
>>
>>
>>Any pointers?
>>
>>
>>-Thanks,
>> Chris Bartram
>>
>>"The purpose of life is not to be happy. It is to be useful, to be honorable,
>>to be compassionate, to have it make some difference that you have lived and
>>lived well". (Ralph Waldo Emerson)
>>
>
>
>
------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users