Can you say more about your configuration and invocation?
Using net-snmp 5.7.2, I ran:
snmptrapd -Le -f -c ~/snmptrapd.conf udp:2000 udp6:2000
with just this line in ~/snmptrapd.conf
authCommunity log trappy
and then sent a trap with:
snmptrap -v 2c -c trappy
"udp6:[fd7a:629f:52a4:2010:225:90ff:fea8:86a2]:2000" 42 linkUp
and got:
2014-05-08 07:34:17 UDP/IPv6:
[fd7a:629f:52a4:2010:225:90ff:fea8:86a2]:50583 [UDP/IPv6:
[fd7a:629f:52a4:2010:225:90ff:fea8:86a2]:50583]:
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (42) 0:00:00.42
SNMPv2-MIB::snmpTrapOID.0 = OID: IF-MIB::linkUp
Bill
On Thu, May 1, 2014 at 2:00 PM, christopher.wu <christopher...@zoho.com>wrote:
> I'm having a strange problem where my snmptrapd server will not accept v2
> traps/informs if they are sent via ipv6. My snmptrapd server is version
> 5.7.2.1 running on Linux. The traps/informs are being sent by version
> 5.5.1 of snmptrap, also on Linux. I tried version 5.7.2.1 of snmptrap but
> that did not work either.
>
> Here are the scenarios:
>
> 1) v3 inform sent via ipv4 - works
> 1) v3 inform sent via ipv6 - works
> 2) change to v2 and send to same ipv6 address - fails. Because I'm
> running snmptrapd with the '-d' arg I do see the packet come in, but it is
> not accepted. In the packet dump I can see the correct v2 community name
> is being used. Of course I switched to a different, appropriate v2 config
> file for snmptrapd when I switched from sending v3 to v2 traps.
> 3) keep the same v2 credentials and send via ipv4 - works
>
> I couldn't find anything in the bug database that mentions this. Are
> there any debugging steps that I can do to help figure out what is
> happening?
>
> Here's an example of ipv4 working but ipv6 not when v2 is used.
>
>
> Received 75 byte packet from UDP:
> [192.168.108.1]:55953->[192.168.108.2]:162
> 0000: 30 49 02 01 01 04 0A 4E 4F 54 57 4F 52 4B 49 4E
> 0I.....NOTWORKIN
> 0016: 47 A6 38 02 04 1E 48 83 BD 02 01 00 02 01 00 30
> G.8...H........0
> 0032: 2A 30 0F 06 08 2B 06 01 02 01 01 03 00 43 03 67
> *0...+.......C.g
> 0048: 66 B4 30 17 06 0A 2B 06 01 06 03 01 01 04 01 00
> f.0...+.........
> 0064: 06 09 2B 06 01 06 03 01 01 05 01 ..+........
>
> 2014-05-01 13:47:02 UDP: [192.168.108.1]:55953->[192.168.108.2]:162 [UDP:
> [192.168.108.1]:55953->[192.168.108.2]:162]:
> DISMAN-EXPRESSION-MIB::sysUpTimeInstance = Timeticks: (6776500)
> 18:49:25.00 SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-MIB::coldStart
>
> Sending 75 bytes to UDP: [192.168.108.1]:55953->[192.168.108.2]:162
> 0000: 30 49 02 01 01 04 0A 4E 4F 54 57 4F 52 4B 49 4E
> 0I.....NOTWORKIN
> 0016: 47 A2 38 02 04 1E 48 83 BD 02 01 00 02 01 00 30
> G.8...H........0
> 0032: 2A 30 0F 06 08 2B 06 01 02 01 01 03 00 43 03 67
> *0...+.......C.g
> 0048: 66 B4 30 17 06 0A 2B 06 01 06 03 01 01 04 01 00
> f.0...+.........
> 0064: 06 09 2B 06 01 06 03 01 01 05 01 ..+........
>
>
> Received 74 byte packet from UDP/IPv6: [fd22:2222:2222:3490::1]:33344
> 0000: 30 48 02 01 01 04 0A 4E 4F 54 57 4F 52 4B 49 4E
> 0H.....NOTWORKIN
> 0016: 47 A6 37 02 03 68 5B 7F 02 01 00 02 01 00 30 2A
> G.7..h[.......0*
> 0032: 30 0F 06 08 2B 06 01 02 01 01 03 00 43 03 67 66
> 0...+.......C.gf
> 0048: B4 30 17 06 0A 2B 06 01 06 03 01 01 04 01 00 06
> .0...+..........
> 0064: 09 2B 06 01 06 03 01 01 05 01 .+........
>
>
> Received 74 byte packet from UDP/IPv6: [fd22:2222:2222:3490::1]:33344
> 0000: 30 48 02 01 01 04 0A 4E 4F 54 57 4F 52 4B 49 4E
> 0H.....NOTWORKIN
> 0016: 47 A6 37 02 03 68 5B 7F 02 01 00 02 01 00 30 2A
> G.7..h[.......0*
> 0032: 30 0F 06 08 2B 06 01 02 01 01 03 00 43 03 67 66
> 0...+.......C.gf
> 0048: B4 30 17 06 0A 2B 06 01 06 03 01 01 04 01 00 06
> .0...+..........
> 0064: 09 2B 06 01 06 03 01 01 05 01 .+........
>
>
>
> ------------------------------------------------------------------------------
> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
> Instantly run your Selenium tests across 300+ browser/OS combos. Get
> unparalleled scalability from the best Selenium testing platform available.
> Simple to use. Nothing to install. Get started now for free."
> http://p.sf.net/sfu/SauceLabs
> _______________________________________________
> Net-snmp-users mailing list
> Net-snmp-users@lists.sourceforge.net
> Please see the following page to unsubscribe or change other options:
> https://lists.sourceforge.net/lists/listinfo/net-snmp-users
>
------------------------------------------------------------------------------
Is your legacy SCM system holding you back? Join Perforce May 7 to find out:
• 3 signs your SCM is hindering your productivity
• Requirements for releasing software faster
• Expert tips and advice for migrating your SCM now
http://p.sf.net/sfu/perforce
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users