Hi John,
can you try, load variable in snmpd.conf
This requires that the agent was built with support for either the
*ucd-snmp/loadave* module or the *ucd-snmp/memory* module respectively
(both of which are included as part of the default build configuration).load
MAX1 [MAX5 [MAX15]]monitors the load average of the local system,
specifying thresholds for the 1-minute, 5-minute and 15-minute averages. If
any of these loads exceed the associated maximum value, then the
corresponding laErrorFlag instance will be set to 1, and a suitable
description message reported via the laErrMessage instance.
Note ::
In my case * load 30 35 35. *may be you can write small script,
it's automatically write no. cpu cores and max1,max5 and max15 in
snmpd.conf file.
-Dhanasekaran.
Did I learn something today? If not, I wasted it.
On Fri, Apr 17, 2015 at 10:43 AM, bh cm <bhc...@gmail.com> wrote:
> Hi.
>
> I'm trying to configure net-snmp so that it raises SNMP traps when system
> load goes above a certain threshold. My configuration is at
> http://pastebin.com/ZZBRN2bh
>
> I've created some load on the system using stress-ng, but no traps are
> being generated. Any suggestions please? I'm using version 5.5 on RHEL.
>
> Any help would be much appreciated.
>
> best regards,
> John.
>
>
> ------------------------------------------------------------------------------
> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
> Develop your own process in accordance with the BPMN 2 standard
> Learn Process modeling best practices with Bonita BPM through live
> exercises
> http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual-
> event?utm_
> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
> _______________________________________________
> Net-snmp-users mailing list
> Net-snmp-users@lists.sourceforge.net
> Please see the following page to unsubscribe or change other options:
> https://lists.sourceforge.net/lists/listinfo/net-snmp-users
>
>
------------------------------------------------------------------------------
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
Develop your own process in accordance with the BPMN 2 standard
Learn Process modeling best practices with Bonita BPM through live exercises
http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_
source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
