Hi, Do anybody have any input on this behavior.
I have configured two inform destinations but not started one of the destinations trap receiver or removed the network cable from the server PC. At that time if I start the agent on the Linux target then the agent is not doing anything. Agent is waiting for the second destination to be available until then I am not receiving cold start trap at either of the destinations. If I restore the communication to another destination then agent starts functional, I see debug message Net-Snmp 5.7.3 and then cold start is sent to both destinations. Is there any way to make the agent functional with one trap receiver and try for the other trap receiver until it is available. Appreciate your help. Thanks. Raj. On Mon, Aug 3, 2015 at 2:30 PM, raja vankam <raja.van...@gmail.com> wrote: > Hi Robert, > > Thanks for your reply and sorry for the delayed response. > > I had an error on my side due to which I was not interpreting the informs > at the other end. Now I could test SNMP V3 informs with the same or > multiple users to different destinations. > > However I am seeing a behavior which I would like to know whether it is > normal with V3? > > I have configured two inform destinations but not started one of the > destinations trap receiver or made the network to go down, at that time if > I start the agent then agent is not functional. Agent is waiting for the > second destination to be available until then I am not receiving cold start > trap at either of the destinations. I see debug message Net-Snmp 5.7.3 > comes only after all the destinations are available and takes few seconds > after the above message to send the inform. From then onwards I am able to > receive all the subsequent informs and acknowledgements. > > Appreciate your help. > > Thanks. > > Raja. > > On Fri, Jul 17, 2015 at 2:56 PM, Robert Story <rst...@freesnmp.com> wrote: > >> On Wed, 8 Jul 2015 17:03:09 -0500 raja wrote: >> RV> If I try to send Informs to more than one destination with the >> RV> same user or different user then just cold start trap is being >> RV> delivered to all destinations but subsequent Informs are >> RV> delivered to only the first destination in the snmpd.conf. >> >> Hi Raja, >> >> Something is definitely wrong. You should be able to send multiple >> informs to different destinations. Try adding some debg tokens to >> your snmpd command line: "-D trap,send,transport:send" to see >> what's happening. >> >> Robert >> > >
------------------------------------------------------------------------------
_______________________________________________ Net-snmp-users mailing list Net-snmp-users@lists.sourceforge.net Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users
