Thank you Bill Fenner. I will try the same. On Mon, Nov 9, 2015 at 10:53 AM, Bill Fenner <fen...@gmail.com> wrote:
> You configured snmpd to listen on ::1, but you > asked fe80::3e97:eff:fe8b:f326. It's not listening > on fe80::3e97:eff:fe8b:f326, so it will not respond. As you say, when you > make your request to ::1, it works. > > "udp6:[::1]:161" is the equivalent of "udp:127.0.0.1:161". If you want > to listen to the wildcard, you don't specify an address -- just use > "udp6:161". > > Bill > > > On Tue, Nov 3, 2015 at 7:35 AM, Pushpa Thimmaiah < > pushpa.thimma...@gmail.com> wrote: > >> Hi Folks, >> >> I am using ubuntu and ifconfig eth0 says 'inet6 addr:* >> fe80::3e97:eff:fe8b:f326/64'* >> I have tried snmpwalk with ipv6 ipaddress (mentioned below) and it works >> fine >> snmpwalk -v 2c -c public1 'udp6:[::1]:161' >> >> But snmpwalk fails when i used fe80::3e97:eff:fe8b:f326 >> >> $ snmpwalk -v 2c -c public1 "udp6:[fe80::3e97:eff:fe8b:f326]:161" >> Timeout: No Response from udp6:[fe80::3e97:eff:fe8b:f326]:161 >> >> snmpget -v 2c -c public1 udp6:'[*fe80::3e97:eff:fe8b:f326*%eth0]':161 >> .1.3.6.1.2.1.1.1.0 >> Timeout: No Response from udp6:[fe80::3e97:eff:fe8b:f326%eth0]:161. >> >> >> Details: >> 1. ping works >> $ ping6 -c 5 -I eth0 fe80::3e97:eff:fe8b:f326 >> PING fe80::3e97:eff:fe8b:f326(fe80::3e97:eff:fe8b:f326) from >> fe80::3e97:eff:fe8b:f326 eth0: 56 data bytes >> 64 bytes from fe80::3e97:eff:fe8b:f326: icmp_seq=1 ttl=64 time=0.034 ms >> 64 bytes from fe80::3e97:eff:fe8b:f326: icmp_seq=2 ttl=64 time=0.047 ms >> >> 2. snmpagent listening to ipv6 address and community name 'public1' is >> ipv6 >> rocommunity6 public1 default >> agentAddress udp:161,udp6:[::1]:161,tcp:161,tcp6:[::1]:161 >> >> 3. ipv6 enabled >> ~$ net-snmp-config --configure >> '--build=x86_64-linux-gnu' '--includedir=/usr/include' >> '--mandir=/usr/share/man' '--infodir=/usr/share/info' >> '--localstatedir=/var' '--libexecdir=/usr/lib/net-snmp' >> '--disable-maintainer-mode' '--disable-dependency-tracking' '--prefix=/usr' >> '--sysconfdir=/etc' '--mandir=/usr/share/man' >> '--with-persistent-directory=/var/lib/snmp' >> '--enable-ucd-snmp-compatibility' '--enable-shared' '--with-cflags=-g -O2 >> -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security >> -DNETSNMP_USE_INLINE' '--with-perl-modules=INSTALLDIRS=vendor' >> '--enable-as-needed' *'--enable-ipv6'* '--with-logfile=none' >> '--without-rpm' '--with-libwrap' '--with-openssl' '--without-dmalloc' >> '--without-efence' '--without-rsaref' '--with-sys-contact=root' >> '--with-sys-location=Unknown' '--with-mib-modules=host smux ucd-snmp/dlmod >> ucd-snmp/diskio ucd-snmp/lmSensors host' '--with-out-mib-modules=' >> '--enable-mfd-rewrites' '--with-mnttab=/etc/mtab' >> '--with-mibdirs=/home/test/.snmp/mibs:/usr/share/mibs/site:/usr/share/snmp/mibs:/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/netsnmp' >> '--with-defaults' 'build_alias=x86_64-linux-gnu' 'CFLAGS=-g -O2 >> -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security' >> 'LDFLAGS=-Wl,-Bsymbolic-functions -Wl,-z,relro' >> 'CPPFLAGS=-D_FORTIFY_SOURCE=2' >> pushpa@CLPMYSFC067:~$ >> >> Please let me know for more details >> >> Thank you, >> Pushpa.T >> >> >> ------------------------------------------------------------------------------ >> >> _______________________________________________ >> Net-snmp-users mailing list >> Net-snmp-users@lists.sourceforge.net >> Please see the following page to unsubscribe or change other options: >> https://lists.sourceforge.net/lists/listinfo/net-snmp-users >> >> >
------------------------------------------------------------------------------
_______________________________________________ Net-snmp-users mailing list Net-snmp-users@lists.sourceforge.net Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users
