Hi Team,
I am having a problem when retrieving the value of dynamic counters having
an index greater than 114 as shown below on my Linux box
snmpwalk -v2c -c public localhost
jinny.generic.jar.smppsirTable.smppsirEntry.smppsir-dlvmo.115
jinny.generic.jar.smppsirTable.smppsirEntry.smppsir-dlvmo.115: Unknown
Object Identifier (Index out of range: 115 (name))
While if i perform the same command on an index lower than 115 the value is
properly returned
snmpwalk -v2c -c public localhost
jinny.generic.jar.smppsirTable.smppsirEntry.smppsir-dlvmo.111
JINNY-JAR-MIB::smppsir-dlvmo.111 = Counter32: 0
The related part of the MIB is the following:
-- JAR- SMPP SI RX dynamic counters
smppsirTable OBJECT-TYPE
SYNTAX SEQUENCE OF SMPPSIREntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
::= { jar 60 }
smppsirEntry OBJECT-TYPE
SYNTAX SMPPSIREntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { name }
::= { smppsirTable 1 }
SMPPSIREntry ::= SEQUENCE {
name OCTET STRING,
smppsir-bndrx Counter,
smppsir-bndrx-a Counter,
smppsir-dlvmo Counter,
smppsir-dlvmo-a Counter,
smppsir-dr Counter,
smppsir-dr-a Counter,
smppsir-alive Gauge,
smppsir-slink Counter,
smppsir-slink-a Counter,
smppsir-rlink Counter,
smppsir-rlink-a Counter,
smppsir-dmo-ack Counter,
smppsir-dr-ack Counter,
smppsir-dr-dlv Counter,
smppsir-dr-udlv Counter }
name OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The dynamic name of the counter"
::= { smppsirEntry 2 }
smppsir-bndrx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "Total receiver binds"
::= { smppsirEntry 3 }
smppsir-bndrx-a OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "Total receiver binds (ack)"
::= { smppsirEntry 4 }
smppsir-dlvmo OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "Total Received MO messages"
::= { smppsirEntry 5 }
smppsir-dlvmo-a OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "Total Received MO messages (ack)"
::= { smppsirEntry 6 }
If we run the snmpwalk to retrieve all the dlvmo counters values all the
counters are displayed even the ones having an index higher than 114
snmpwalk -v2c -c public localhost
jinny.generic.jar.smppsirTable.smppsirEntry.smppsir-dlvmo
JINNY-JAR-MIB::smppsir-dlvmo.1 = Counter32: 0
JINNY-JAR-MIB::smppsir-dlvmo.2 = Counter32: 0
JINNY-JAR-MIB::smppsir-dlvmo.3 = Counter32: 0
JINNY-JAR-MIB::smppsir-dlvmo.4 = Counter32: 0
JINNY-JAR-MIB::smppsir-dlvmo.5 = Counter32: 0
...
...
JINNY-JAR-MIB::smppsir-dlvmo.118 = Counter32: 0
JINNY-JAR-MIB::smppsir-dlvmo.119 = Counter32: 19136
JINNY-JAR-MIB::smppsir-dlvmo.120 = Counter32: 38025
JINNY-JAR-MIB::smppsir-dlvmo.121 = Counter32: 113871
JINNY-JAR-MIB::smppsir-dlvmo.122 = Counter32: 190952
...
...
Thus the problem is only when trying to retrieve dynamic counters with
index greater than 114
The server has SNMP version 5.3.2.2
snmpwalk -V
NET-SNMP version: 5.3.2.2
Can you advice concerning this problem
Thanks in advance.
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
