On Mon, 22 Dec 2014 16:40:46 +0800 JingYuan Chen <[email protected]> wrote:
> Hello, > > I have installed NetBSD 6.1.5 in my old laptop, Compaq Presario 2800. > Everything works properly but usb wifi adapter, 3COM 3CRUSB10075, can not > connect to Internet. This adapter's driver, zyd, was loaded by NetBSD at > boot time and assigned as zyd0. > > After starting wpa_supplicant manually, it shows that it is associated with > my AP. However, I find that this adapter's status is active , not > associated, in ifconfig. I try to use parameter -d and -f to get > wpa_supplicant's log. But there is no error with WPA's authorization. > > I try to use dhclient with zyd0 and it gets an IP address successfully. So, > I think that it works with my AP. But sometimes it returns "zyd0 : xfer too > short (length=22)". What is the meaning of this ? Actually, I can not ping > my AP from zyd0. I have to flush route table and add default gateway with > interface zyd0. Then I can ping my AP. But I still can not surf Internet. > > I wonder whether I activate this adapter successfully or not. Is there > anything I missed ? > > Any advice would be appreciated. this Howto from the wiki may help? worked for me. http://wiki.netbsd.org/tutorials/how_to_use_wpa_supplicant/ May be interested in using wireless pccard instead and save the USB port for something else:-) I just picked up a used netgear wg511t pccard for my ten year old pentium m laptop for $8.00 from ebay the ath driver supports it, however, watch out for the caveats mentioned on the ath man page -- Ed <[email protected]>
