Hello imglitch and Bretty, Brett Lymn writes: > On Mon, Oct 01, 2018 at 10:40:48PM +0000, imgli...@protonmail.com wrote: > > > > So, I took a look at > > http://netbsd.gw.com/cgi-bin/man-cgi?urtwn+4.i386+NetBSD-8.0 and despite > > the fact the my specific device is not listed on the hardware list, it`s > > chipset is listed as one of the supported ones. If the chipset is > > supported, then why it is loaded as ugen when I plug it on my laptop? > > > > My adapter: TP-LINK TL WN823N > > Chipset: RTL8192EU > > > > The EU on the end is very significant. That variant is not supported at > the moment. I have some (old) local mods that get the firmware loaded > but I was stuck on getting the interface actually passing packets. It > is not just a matter of adding the USB id unfortunately, the method of > loading the firmware is not the same as the other 8192 chipset variants. >
At least on -current (after Jun 2018) urtwn(4) seems to had several commits about 8192EU support. If you have not tried them recently probably it's worth to try (otherwise please ignore this email!).