I just did a quick test of 8.99.51 amd64 from yesterday (self-built, but
with no changes) to see how the EFI/GPT installation works using the latest
sysinstall (good work, Martin). This was done under VirtualBox, using a
newly created NetBSD/amd64 VM with EFI enabled.

Everything worked as it should for me this time, I didn't have to resort to
manual creation of the GPT partitions etc. as described elsewhere. Even
pkgin setup worked first time (I have a local pkgin repo using either ftp
or nfs, the test was using ftp).

On my present laptop I have been running NetBSD in EFI mode for quite some
time, but the installation was manual, following the sequence described in
the post about NetBSD on EFI.  It is on a secondary disk, shared with
instances of OpenSUSE/tumbleweed, RedHat 7.6 (the upgrade to 8.0 failed, so
I reverted), and one GPT partition for some Windows data. The primary disk
is also GPT, but it holds only Windows 10.



On Mon, 29 Jul 2019 at 06:18, Thomas Mueller <[email protected]> wrote:
>
> > Emmanuel Dreyfus <[email protected]> wrote:
>
> > > - in UEFI mode, bootstrap does not read boot.cfg and while it sees the
> > > GPT partitions, it is unable to access a RAID that has a GPT inside.
It
> > > can access a RAID that has a disklabel inside, though, but that does
not
> > > help for > 2 TB.
>
> > Reading the sources, I find that boot.cfg should be stored in the EFI
> > partion as /EFI/NetBSD/boot.cfg and ineed if it is at this location, EFI
> > bootstrap finds it.
>
> > I still have the problem with accessing a RAIDframe containing a GPT.
>
> > Emmanuel Dreyfus
>
> Where in the source tree would I find the stuff on booting EFI?
>
> I have NetBSD installations for both amd64 and i386, am also curious
about /usr/mdec/bootx64.efi and bootia32.efi .
>
> I see FreeBSD 12-STABLE and HEAD (13-current) include efibootmgr.
>
> When I tried to boot NetBSD-current by UEFI, I had trouble specifying the
root partition in a way that the boot loader would understand, finally got
that far, but NetBSD (current amd64) hung after the first line of screen
output.
>
> Tom
>


-- 
----
-- 
----

Reply via email to