Is there already a way to do "hard real time" on NetBSD?

To me, "hard real time" means from an external pin going 'high' to the 1st
instruction of my driver executing is on the order of (up to) 10 usec.

Many eons ago, I did this on BSD4.3 VAX 785 and achieved <  about 100 usec
jitter.  It was a Royal Pain to do, since so many places in the kernel
turned off interrupts as it massaged various data structures.  The pain was
to find every one of those and break them down to absolutely minimize the
time interrupts were turned off.

But it worked:  Here it is controlling various hopping machines:
https://www.youtube.com/watch?v=mG_ZKXo6Rlg&feature=youtu.be&t=34  I'm
sitting controlling the thing; the umbilical goes back to a UNIBUS
interface in the VAX.  Timesharing only slowed down; it did not stop during
operation.

I'm especially interested in getting the RPi to operate 'hard real time' on
NetBSD.  I mainly want to use the RPi to control a robot -- low  level as
well has higher-level planning/control.


Thanks for any pointers,
Mike

Reply via email to