Here is dmesg: [ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved.
[ 1.000000] NetBSD 9.0_STABLE (MY-GENERIC) #0: Sat May 9 12:16:18 UTC 2020 [ 1.000000] [email protected]:/usr/src/sys/arch/amd64/compile/MY-GENERIC [ 1.000000] total memory = 65467 MB [ 1.000000] avail memory = 63548 MB [ 1.000000] cpu_rng: RDSEED [ 1.000000] rnd: seeded with 256 bits [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [ 1.000003] Gigabyte Technology Co., Ltd. Z390 GAMING X (Default string) [ 1.000003] mainbus0 (root) [ 1.000003] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA) [ 1.000003] ACPI: XSDT 0x000000003E36C0A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013) [ 1.000003] ACPI: FACP 0x000000003E3ACD80 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 1.000003] ACPI: DSDT 0x000000003E36C208 040B71 (v02 ALASKA A M I 01072009 INTL 20160527) [ 1.000003] ACPI: FACS 0x000000003E407080 000040 [ 1.000003] ACPI: APIC 0x000000003E3ACE98 0000A0 (v04 ALASKA A M I 01072009 AMI 00010013) [ 1.000003] ACPI: FPDT 0x000000003E3ACF38 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 1.000003] ACPI: FIDT 0x000000003E3ACF80 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 1.000003] ACPI: MCFG 0x000000003E3AD020 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 1.000003] ACPI: SSDT 0x000000003E3AD060 000204 (v01 ALASKA A M I 00001000 INTL 20160527) [ 1.000003] ACPI: SSDT 0x000000003E3AD268 0017D5 (v02 ALASKA A M I 00003000 INTL 20160527) [ 1.000003] ACPI: SSDT 0x000000003E3AEA40 008056 (v01 ALASKA A M I 00000001 INTL 20160527) [ 1.000003] ACPI: SSDT 0x000000003E3B6A98 0031C7 (v02 ALASKA A M I 00003000 INTL 20160527) [ 1.000003] ACPI: SSDT 0x000000003E3B9C60 002358 (v02 ALASKA A M I 00001000 INTL 20160527) [ 1.000003] ACPI: HPET 0x000000003E3BBFB8 000038 (v01 ALASKA A M I 00000002 01000013) [ 1.000003] ACPI: SSDT 0x000000003E3BBFF0 000F9E (v02 ALASKA A M I 00001000 INTL 20160527) [ 1.000003] ACPI: SSDT 0x000000003E3BCF90 002D1B (v02 ALASKA A M I 00000000 INTL 20160527) [ 1.000003] ACPI: UEFI 0x000000003E3BFCB0 000042 (v01 ALASKA A M I 00000002 01000013) [ 1.000003] ACPI: LPIT 0x000000003E3BFCF8 00005C (v01 ALASKA A M I 00000002 01000013) [ 1.000003] ACPI: SSDT 0x000000003E3BFD58 0027DE (v02 ALASKA A M I 00001000 INTL 20160527) [ 1.000003] ACPI: SSDT 0x000000003E3C2538 000FFE (v02 ALASKA A M I 00000000 INTL 20160527) [ 1.000003] ACPI: DBGP 0x000000003E3C3538 000034 (v01 ALASKA A M I 00000002 01000013) [ 1.000003] ACPI: DBG2 0x000000003E3C3570 000054 (v00 ALASKA A M I 00000002 01000013) [ 1.000003] ACPI: DMAR 0x000000003E3C35C8 000070 (v01 ALASKA A M I 00000002 01000013) [ 1.000003] ACPI: WSMT 0x000000003E3C3638 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 1.000003] ACPI: 10 ACPI AML tables successfully acquired and loaded [ 1.000003] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins [ 1.000003] cpu0 at mainbus0 apid 0 [ 1.000003] cpu0: Intel(R) Core(TM) i5-9400F CPU @ 2.90GHz, id 0x906ea [ 1.000003] cpu0: package 0, core 0, smt 0 [ 1.000003] cpu1 at mainbus0 apid 2 [ 1.000003] cpu1: Intel(R) Core(TM) i5-9400F CPU @ 2.90GHz, id 0x906ea [ 1.000003] cpu1: package 0, core 1, smt 0 [ 1.000003] cpu2 at mainbus0 apid 4 [ 1.000003] cpu2: Intel(R) Core(TM) i5-9400F CPU @ 2.90GHz, id 0x906ea [ 1.000003] cpu2: package 0, core 2, smt 0 [ 1.000003] cpu3 at mainbus0 apid 6 [ 1.000003] cpu3: Intel(R) Core(TM) i5-9400F CPU @ 2.90GHz, id 0x906ea [ 1.000003] cpu3: package 0, core 3, smt 0 [ 1.000003] cpu4 at mainbus0 apid 8 [ 1.000003] cpu4: Intel(R) Core(TM) i5-9400F CPU @ 2.90GHz, id 0x906ea [ 1.000003] cpu4: package 0, core 4, smt 0 [ 1.000003] cpu5 at mainbus0 apid 10 [ 1.000003] cpu5: Intel(R) Core(TM) i5-9400F CPU @ 2.90GHz, id 0x906ea [ 1.000003] cpu5: package 0, core 5, smt 0 [ 1.000003] acpi0 at mainbus0: Intel ACPICA 20190405 [ 1.000003] acpi0: X/RSDT: OemId <ALASKA, A M I,01072009>, AslId <AMI ,00010013> [ 1.000003] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000 [ 1.000003] ACPI: Dynamic OEM Table Load: [ 1.000003] ACPI: SSDT 0xFFFFFECE00B86008 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527) [ 1.000003] ACPI: Dynamic OEM Table Load: [ 1.000003] ACPI: SSDT 0xFFFFFECE00B86808 0006A5 (v02 PmRef Cpu0Ist 00003000 INTL 20160527) [ 1.000003] ACPI: Dynamic OEM Table Load: [ 1.000003] ACPI: SSDT 0xFFFFFECDC7B6E008 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527) [ 1.000003] ACPI: Dynamic OEM Table Load: [ 1.000003] ACPI: SSDT 0xFFFFFECE00AD1008 00030A (v02 PmRef ApCst 00003000 INTL 20160527) [ 1.000003] acpi0: SCI interrupting at int 9 [ 1.000003] acpi0: fixed power button present [ 1.000003] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 [ 1.006372] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [ 1.006372] timecounter: Timecounter "hpet0" frequency 24000000 Hz quality 2000 [ 1.006581] acpiec0 at acpi0 (H_EC, PNP0C09-1)acpiec0: autoconfiguration error: unable to evaluate _GPE: AE_NOT_FOUND [ 1.006581] SIO1 (PNP0C02) at acpi0 not configured [ 1.006581] pckbc1 at acpi0 (PS2K, PNP0303-0) (kbd port): io 0x60,0x64 irq 1 [ 1.006581] UAR1 (PNP0501) at acpi0 not configured [ 1.006581] LDRC (PNP0C02) at acpi0 not configured [ 1.006581] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0 [ 1.006581] CWDT (INT3F0D) at acpi0 not configured [ 1.006581] PDRC (PNP0C02) at acpi0 not configured [ 1.006581] IOTR (PNP0C02) at acpi0 not configured [ 1.006581] GPI0 (INT3450) at acpi0 not configured [ 1.006581] WMTF (PNP0C14) at acpi0 not configured [ 1.006581] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button [ 1.006581] WFDE (PNP0C14) at acpi0 not configured [ 1.006581] WFTE (PNP0C14) at acpi0 not configured [ 1.006581] PEPD (INT33A1) at acpi0 not configured [ 1.006581] acpibut1 at acpi0 (PWRB, PNP0C0C): ACPI Power Button [ 1.006581] PTID (INT340E) at acpi0 not configured [ 1.006581] acpitz0 at acpi0 (TZ10) [ 1.006581] acpitz0: levels: critical 20.8 C, hot 19.8 C, passive 16.8 C, passive cooling [ 1.006581] acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan [ 1.006581] acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan [ 1.006581] acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan [ 1.006581] acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan [ 1.006581] acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan [ 1.006581] acpitz1 at acpi0 (TZ00) [ 1.006581] acpitz1: active cooling level 0: 71.0C [ 1.006581] acpitz1: active cooling level 1: 55.0C [ 1.006581] acpitz1: active cooling level 2: 50.0C [ 1.006581] acpitz1: active cooling level 3: 45.0C [ 1.006581] acpitz1: active cooling level 4: 40.0C [ 1.006581] acpitz1: levels: critical 119.0 C [ 1.006581] GSA1 (PNP0C14) at acpi0 not configured [ 1.006581] ACPI: Enabled 6 GPEs in block 00 to 7F [ 1.006581] pckbd0 at pckbc1 (kbd slot) [ 1.006581] pckbc1: using irq 1 for kbd slot [ 1.006581] wskbd0 at pckbd0: console keyboard [ 1.006581] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.006581] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.006581] pchb0 at pci0 dev 0 function 0: Intel Core 8G (S) Host Bridge, DRAM (rev. 0x07) [ 1.006581] ppb0 at pci0 dev 1 function 0: Intel Core 6G PCIe x16 (rev. 0x07) [ 1.006581] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s [ 1.006581] pci1 at ppb0 bus 1 [ 1.006581] pci1: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.006581] vga0 at pci1 dev 0 function 0: NVIDIA product 2184 (rev. 0xa1) [ 1.006581] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 [ 1.006581] wsmux1: connecting to wsdisplay0 [ 1.006581] drm at vga0 not configured [ 1.006581] hdaudio0 at pci1 dev 0 function 1: HD Audio Controller [ 1.006581] hdaudio0: interrupting at msi0 vec 0 [ 1.006581] hdafg0 at hdaudio0: vendor 10de product 0099 [ 1.006581] hdafg0: DP00 8ch: Digital Out [Jack] [ 1.006581] hdafg0: DP01 8ch: Digital Out [Jack] [ 1.006581] hdafg0: DP02 8ch: Digital Out [Jack] [ 1.006581] hdafg0: DP03 8ch: Digital Out [Jack] [ 1.006581] hdafg0: 8ch/0ch 48000Hz PCM16* [ 1.006581] xhci0 at pci1 dev 0 function 2: NVIDIA product 1aec (rev. 0xa1) [ 1.006581] xhci0: interrupting at msi1 vec 0 [ 1.006581] xhci0: xHCI version 1.10 [ 1.006581] usb0 at xhci0: USB revision 3.1 [ 1.006581] usb1 at xhci0: USB revision 2.0 [ 1.006581] NVIDIA product 1aed (miscellaneous serial bus, revision 0xa1) at pci1 dev 0 function 3 not configured [ 1.006581] Intel 300 Series Thermal (miscellaneous DASP, revision 0x10) at pci0 dev 18 function 0 not configured [ 1.006581] xhci1 at pci0 dev 20 function 0: Intel 300 Series USB 3.1 xHCI (rev. 0x10) [ 1.006581] xhci1: interrupting at msi2 vec 0 [ 1.006581] xhci1: xHCI version 1.10 [ 1.006581] usb2 at xhci1: USB revision 3.1 [ 1.006581] usb3 at xhci1: USB revision 2.0 [ 1.006581] Intel 300 Series Shared SRAM (RAM memory, revision 0x10) at pci0 dev 20 function 2 not configured [ 1.006581] Intel 300 Series MEI (miscellaneous communications, revision 0x10) at pci0 dev 22 function 0 not configured [ 1.006581] ahcisata0 at pci0 dev 23 function 0: Intel 300 Series SATA (AHCI) desktop (rev. 0x10) [ 1.006581] ahcisata0: 64-bit DMA [ 1.006581] ahcisata0: AHCI revision 1.31, 6 ports, 32 slots, CAP 0xe134ff45<EMS,PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SSNTF,SNCQ,S64A> [ 1.006581] ahcisata0: interrupting at msi3 vec 0 [ 1.006581] atabus0 at ahcisata0 channel 0 [ 1.006581] atabus1 at ahcisata0 channel 1 [ 1.006581] atabus2 at ahcisata0 channel 2 [ 1.006581] atabus3 at ahcisata0 channel 3 [ 1.006581] atabus4 at ahcisata0 channel 4 [ 1.006581] atabus5 at ahcisata0 channel 5 [ 1.006581] ppb1 at pci0 dev 27 function 0: Intel 300 Series PCIe (rev. 0xf0) [ 1.006581] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s [ 1.006581] pci2 at ppb1 bus 2 [ 1.006581] pci2: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.006581] ppb2 at pci0 dev 28 function 0: Intel 300 Series PCIe (rev. 0xf0) [ 1.006581] ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s [ 1.006581] pci3 at ppb2 bus 3 [ 1.006581] pci3: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.006581] ppb3 at pci0 dev 29 function 0: Intel 300 Series PCIe (rev. 0xf0) [ 1.006581] ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 8.0GT/s [ 1.006581] pci4 at ppb3 bus 4 [ 1.006581] pci4: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.006581] pcib0 at pci0 dev 31 function 0: Intel Z390 LPC (rev. 0x10) [ 1.006581] hdaudio1 at pci0 dev 31 function 3: HD Audio Controller [ 1.006581] hdaudio1: interrupting at msi4 vec 0 [ 1.006581] hdafg1 at hdaudio1: vendor 10ec product 0892 [ 1.006581] hdafg1: DAC00 8ch: Speaker [Jack] [ 1.006581] hdafg1: DAC01 2ch: HP Out [Jack] [ 1.006581] hdafg1: DIG02 2ch: SPDIF Out [Built-In] [ 1.006581] hdafg1: ADC03 2ch: Line In [Jack], Mic In [Jack] [ 1.006581] hdafg1: ADC04 2ch: Mic In [Jack] [ 1.006581] hdafg1: 8ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3 [ 1.006581] audio0 at hdafg1: playback, capture, full duplex, independent [ 1.006581] audio0: slinear_le:16 8ch 48000Hz, blk 4ms for playback [ 1.006581] audio0: slinear_le:16 2ch 48000Hz, blk 4ms for recording [ 1.006581] spkr0 at audio0: PC Speaker (synthesized) [ 1.006581] wsbell at spkr0 not configured [ 1.006581] ichsmb0 at pci0 dev 31 function 4: Intel 300 Series SMBus (rev. 0x10) [ 1.006581] ichsmb0: interrupting at ioapic0 pin 16 [ 1.006581] iic0 at ichsmb0: I2C bus [ 1.006581] Intel 300 Series SPI (FLASH) (miscellaneous serial bus, revision 0x10) at pci0 dev 31 function 5 not configured [ 1.006581] wm0 at pci0 dev 31 function 6: I219 V Ethernet Connection (rev. 0x10) [ 1.006581] wm0: interrupting at msi5 vec 0 [ 1.006581] wm0: PCI-Express bus [ 1.006581] wm0: 4096 words FLASH, version 0.5.4 [ 1.006581] wm0: Ethernet address b4:2e:99:35:88:7f [ 1.006581] wm0: 0x6a4080<FLASH,PCIE,ASF_FIRM,AMT,WOL,EEE> [ 1.006581] ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 6 [ 1.006581] ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.006581] isa0 at pcib0 [ 1.006581] pcppi0 at isa0 port 0x61 [ 1.006581] spkr1 at pcppi0: PC Speaker [ 1.006581] wsbell at spkr1 not configured [ 1.006581] midi0 at pcppi0: PC speaker [ 1.006581] sysbeep0 at pcppi0 [ 1.006581] attimer1: attached to pcppi0 [ 1.006581] acpicpu0 at cpu0: ACPI CPU [ 1.006581] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW [ 1.006581] acpicpu0: C2: FFH, lat 151 us, pow 200 mW [ 1.006581] acpicpu0: C3: FFH, lat 1034 us, pow 200 mW [ 1.006581] acpicpu0: P0: FFH, lat 10 us, pow 65000 mW, 2901 MHz, turbo boost [ 1.006581] acpicpu0: P1: FFH, lat 10 us, pow 65000 mW, 2900 MHz [ 1.006581] acpicpu0: P2: FFH, lat 10 us, pow 59079 mW, 2700 MHz [ 1.006581] acpicpu0: P3: FFH, lat 10 us, pow 55888 mW, 2600 MHz [ 1.006581] acpicpu0: P4: FFH, lat 10 us, pow 50305 mW, 2400 MHz [ 1.006581] acpicpu0: P5: FFH, lat 10 us, pow 47907 mW, 2300 MHz [ 1.006581] acpicpu0: P6: FFH, lat 10 us, pow 42638 mW, 2100 MHz [ 1.006581] acpicpu0: P7: FFH, lat 10 us, pow 39789 mW, 2000 MHz [ 1.006581] acpicpu0: P8: FFH, lat 10 us, pow 35419 mW, 1800 MHz [ 1.006581] acpicpu0: P9: FFH, lat 10 us, pow 32733 mW, 1700 MHz [ 1.006581] acpicpu0: P10: FFH, lat 10 us, pow 28082 mW, 1500 MHz [ 1.006581] acpicpu0: P11: FFH, lat 10 us, pow 26104 mW, 1400 MHz [ 1.006581] acpicpu0: P12: FFH, lat 10 us, pow 21749 mW, 1200 MHz [ 1.006581] acpicpu0: P13: FFH, lat 10 us, pow 19381 mW, 1100 MHz [ 1.006581] acpicpu0: P14: FFH, lat 10 us, pow 15828 mW, 900 MHz [ 1.006581] acpicpu0: P15: FFH, lat 10 us, pow 13609 mW, 800 MHz [ 1.006581] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100 [ 1.006581] acpicpu1 at cpu1: ACPI CPU [ 1.006581] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100 [ 1.006581] acpicpu2 at cpu2: ACPI CPU [ 1.006581] coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=100 [ 1.006581] acpicpu3 at cpu3: ACPI CPU [ 1.006581] coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=100 [ 1.006581] acpicpu4 at cpu4: ACPI CPU [ 1.006581] coretemp4 at cpu4: thermal sensor, 1 C resolution, Tjmax=100 [ 1.006581] acpicpu5 at cpu5: ACPI CPU [ 1.006581] coretemp5 at cpu5: thermal sensor, 1 C resolution, Tjmax=100 [ 1.006581] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.716582] timecounter: Timecounter "TSC" frequency 2906139160 Hz quality 3000 [ 1.717102] uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0 [ 1.717102] uhub0: 4 ports with 4 removable, self powered [ 1.717102] uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0 [ 1.717102] uhub1: 2 ports with 2 removable, self powered [ 1.717102] uhub2 at usb2: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0 [ 1.717102] uhub2: 10 ports with 10 removable, self powered [ 1.717102] uhub3 at usb3: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0 [ 1.717102] uhub3: 16 ports with 16 removable, self powered [ 1.717102] IPsec: Initialized Security Association Processing. [ 1.816931] ahcisata0 port 0: device present, speed: 6.0Gb/s [ 1.816931] ahcisata0 port 2: device present, speed: 1.5Gb/s [ 1.816931] ahcisata0 port 4: device present, speed: 6.0Gb/s [ 1.816931] ahcisata0 port 5: device present, speed: 1.5Gb/s [ 2.820591] ahcisata0 port 1: PHY offline [ 2.820591] ahcisata0 port 3: PHY offline [ 3.322421] uhub3: autoconfiguration error: device problem, disabling port 7 [ 3.352532] wd0 at atabus0 drive 0 [ 3.352532] wd0: <WDC WD10EALX-759BA1> [ 3.352532] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [ 3.352532] wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors [ 3.402714] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO [ 3.402714] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO [ 3.402714] atapibus0 at atabus2: 1 targets [ 3.402714] cd0 at atapibus0 drive 0: <DRW-24F1ST d, K18I4AJ5400, 1.00> cdrom removable [ 3.412751] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) [ 3.412751] cd0(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA) [ 3.412751] wd1 at atabus4 drive 0 [ 3.412751] wd1: <SanDisk SSD PLUS 480GB> [ 3.412751] wd1: drive supports 1-sector PIO transfers, LBA48 addressing [ 3.412751] wd1: 447 GB, 930261 cyl, 16 head, 63 sec, 512 bytes/sect x 937703088 sectors [ 3.412751] wd1: GPT GUID: 57b21fd8-752c-4d52-b32b-78acfc40d8a9 [ 3.412751] dk0 at wd1: "Basic data partition", 1083392 blocks at 2048, type: <unknown> [ 3.412751] dk1 at wd1: "EFI system partition", 202752 blocks at 1085440, type: msdos [ 3.412751] dk2 at wd1: "Microsoft reserved partition", 32768 blocks at 1288192, type: <unknown> [ 3.412751] dk3 at wd1: "550af7ea-9121-461f-9986-a3121c0a7fce", 936380416 blocks at 1320960, type: ntfs [ 3.412751] autoconfiguration error: wd1: wedge named 'Basic data partition' already existed, using '550af7ea-9121-461f-9986-a3121c0a7fce' [ 3.412751] wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) [ 3.422788] wd1(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) [ 3.422788] atapibus1 at atabus5: 1 targets [ 3.422788] cd1 at atapibus1 drive 0: <TSSTcorp DVD+/-RW TS-H653J, R8CA6GHB512751, D100> cdrom removable [ 3.422788] cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) [ 3.422788] cd1(ahcisata0:5:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA) [ 4.235753] uhub4 at uhub3 port 9: Genesys Logic (0x5e3) USB Hub (0x604), class 9/0, rev 1.10/3.05, addr 2 [ 4.235753] uhub4: 4 ports with 4 removable, self powered [ 5.229378] uhidev0 at uhub4 port 2 configuration 1 interface 0 [ 5.229378] uhidev0: Logitech (0x46d) USB Receiver (0xc52b), rev 2.00/12.11, addr 3, iclass 3/1 [ 5.229378] ukbd0 at uhidev0 [ 5.640879] wskbd1 at ukbd0 mux 1 [ 5.640879] wskbd1: connecting to wsdisplay0 [ 5.640879] uhidev1 at uhub4 port 2 configuration 1 interface 1 [ 5.640879] uhidev1: Logitech (0x46d) USB Receiver (0xc52b), rev 2.00/12.11, addr 3, iclass 3/1 [ 5.640879] uhidev1: 8 report ids [ 5.640879] ums0 at uhidev1 reportid 2: 16 buttons, W and Z dirs [ 5.640879] wsmouse0 at ums0 mux 0 [ 5.640879] uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 [ 5.640879] uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0 [ 5.640879] uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0 [ 5.640879] uhidev2 at uhub4 port 2 configuration 1 interface 2 [ 5.640879] uhidev2: Logitech (0x46d) USB Receiver (0xc52b), rev 2.00/12.11, addr 3, iclass 3/0 [ 5.640879] uhidev2: 33 report ids [ 5.640879] uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0 [ 5.640879] uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0 [ 5.640879] uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0 [ 5.640879] uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0 [ 6.303295] umass0 at uhub4 port 4 configuration 1 interface 0 [ 6.303295] umass0: Generic (0x58f) Flash Card Reader/Writer (0x6366), rev 2.00/1.00, addr 4 [ 6.303295] umass0: using SCSI over Bulk-Only [ 6.303295] scsibus0 at umass0: 2 targets, 1 lun per target [ 6.303295] sd0 at scsibus0 target 0 lun 0: <Multiple, Card Reader, 1.00> disk removable [ 6.604393] sd0: fabricating a geometry [ 6.614454] sd0: 7580 MB, 7580 cyl, 64 head, 32 sec, 512 bytes/sect x 15523840 sectors [ 6.614454] sd0: fabricating a geometry [ 6.644540] WARNING: 3 errors while detecting hardware; check system log. [ 6.674650] boot device: wd0 [ 6.674650] root on wd0a dumps on wd0b [ 6.704759] root file system type: ffs [ 6.704759] kern.module.path=/stand/amd64/9.0/modules [ 7.798749] cd0(ahcisata0:2:0): DEFERRED ERROR, key = 0x2 [ 15.878219] wsdisplay0: screen 1 added (80x25, vt100 emulation) [ 15.878219] wsdisplay0: screen 2 added (80x25, vt100 emulation) [ 15.888253] wsdisplay0: screen 3 added (80x25, vt100 emulation) [ 15.888253] wsdisplay0: screen 4 added (80x25, vt100 emulation) [ 16.711257] cd0(ahcisata0:2:0): DEFERRED ERROR, key = 0x2 [ 18.276968] uhub3: port 7, set config at addr 5 failed [ 18.276968] uhub3: autoconfiguration error: device problem, disabling port 7 [ 19.170226] uhub3: autoconfiguration error: device problem, disabling port 7 [ 22.321720] uhub3: autoconfiguration error: device problem, disabling port 7 [ 23.636516] uhub3: autoconfiguration error: device problem, disabling port 7 [ 49.300118] uhub3: autoconfiguration error: device problem, disabling port 7 [ 54.368605] uhub3: autoconfiguration error: device problem, disabling port 7 [ 56.135048] uhub3: autoconfiguration error: device problem, disabling port 7 [ 58.202589] uhub3: autoconfiguration error: device problem, disabling port 7 [ 60.019215] uhub3: autoconfiguration error: device problem, disabling port 7 [ 61.494596] uhub3: autoconfiguration error: device problem, disabling port 7 [ 63.451734] umass1 at uhub3 port 7 configuration 1 interface 0 [ 63.451734] umass1: Generic (0x14cd) Mass Storage Device (0x125d), rev 2.00/1.00, addr 15 [ 63.451734] umass1: using SCSI over Bulk-Only [ 63.451734] scsibus1 at umass1: 2 targets, 1 lun per target [ 63.612320] umass1: BBB reset failed, IOERROR [ 76.830531] scsibus1: detached [ 76.830531] umass1: detached [ 76.830531] umass1: at uhub3 port 7 (addr 15) disconnected At the top: Whats with: IOTR (PNP0C02) at acpi0 not configured At the bottom: [ 49.300118] uhub3: autoconfiguration error: device problem, disabling port 7 The port 7 error above started happening today. This is also a custom config/compile. Did I turn something off that was supposed to be left on?
