Michael van Elst a écrit :
> joel.bertr...@systella.fr (=?UTF-8?Q?BERTRAND_Jo=c3=abl?=) writes:
>
>> But jumbo frames and Intel adapter don't increase NAS throughput :
>> 204Mb 407Mb 611Mb 814Mb
>
> Where does this information come from?
iftop.
> If you believe the network itself is the bottleneck, can you test
> just the network (e.g. with iperf3) ?
I cannot test wm0 interface (I have to dismount iSCSI volume).
Nervertheless, I have tested another interface (agr0=wm3/vm4) :
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.10.103, port 40986
[ 5] local 192.168.10.128 port 5201 connected to 192.168.10.103 port 40988
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 110 MBytes 919 Mbits/sec
[ 5] 1.00-2.00 sec 111 MBytes 932 Mbits/sec
[ 5] 2.00-3.00 sec 110 MBytes 925 Mbits/sec
[ 5] 3.00-4.00 sec 111 MBytes 934 Mbits/sec
[ 5] 4.00-5.00 sec 112 MBytes 936 Mbits/sec
[ 5] 5.00-6.00 sec 112 MBytes 936 Mbits/sec
[ 5] 6.00-7.00 sec 111 MBytes 935 Mbits/sec
[ 5] 7.00-8.00 sec 111 MBytes 935 Mbits/sec
[ 5] 8.00-9.00 sec 111 MBytes 928 Mbits/sec
[ 5] 9.00-10.00 sec 111 MBytes 934 Mbits/sec
[ 5] 10.00-10.00 sec 33.9 KBytes 785 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.00 sec 1.08 GBytes 931 Mbits/sec
receiver
hilbert:[~] > iperf3 -c 192.168.10.128
Connecting to host 192.168.10.128, port 5201
[ 6] local 192.168.10.103 port 40988 connected to 192.168.10.128 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 6] 0.00-1.00 sec 110 MBytes 922 Mbits/sec 0 69.3 KBytes
[ 6] 1.00-2.00 sec 111 MBytes 932 Mbits/sec 0 69.3 KBytes
[ 6] 2.00-3.00 sec 110 MBytes 925 Mbits/sec 0 69.3 KBytes
[ 6] 3.00-4.00 sec 111 MBytes 934 Mbits/sec 0 69.3 KBytes
[ 6] 4.00-5.00 sec 112 MBytes 936 Mbits/sec 0 69.3 KBytes
[ 6] 5.00-6.00 sec 112 MBytes 936 Mbits/sec 0 69.3 KBytes
[ 6] 6.00-7.00 sec 111 MBytes 935 Mbits/sec 0 69.3 KBytes
[ 6] 7.00-8.00 sec 111 MBytes 935 Mbits/sec 0 69.3 KBytes
[ 6] 8.00-9.00 sec 111 MBytes 928 Mbits/sec 0 69.3 KBytes
[ 6] 9.00-10.00 sec 111 MBytes 935 Mbits/sec 0 69.3 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 6] 0.00-10.00 sec 1.08 GBytes 932 Mbits/sec 0 sender
[ 6] 0.00-10.00 sec 1.08 GBytes 931 Mbits/sec
receiver
iperf Done.
NAS exports a iSCSI device (Raid6, four disks). I have tested disk io's
also :
[~] # qcli_storage -T
fio test command for physical disk: /sbin/fio --filename=test_device
--direct=1 --rw=read --bs=1M --runtime=15 --name=test-read
--ioengine=libaio --iodepth=32 &>/tmp/qcli_storage.log
fio test command for RAID: /sbin/fio --filename=test_device --direct=0
--rw=read --bs=1M --runtime=15 --name=test-read --ioengine=libaio
--iodepth=32 &>/tmp/qcli_storage.log
Start testing!
Performance test is finished 100.000%...
Enclosure Port Sys_Name Throughput RAID RAID_Type
RAID_Throughput Pool
NAS_HOST 1 /dev/sda 210.50 MB/s /dev/md1 RAID 6
310.78 MB/s 1
NAS_HOST 2 /dev/sdb 200.62 MB/s /dev/md1 RAID 6
310.78 MB/s 1
NAS_HOST 3 /dev/sdc 207.33 MB/s /dev/md1 RAID 6
310.78 MB/s 1
NAS_HOST 4 /dev/sdd 206.52 MB/s /dev/md1 RAID 6
310.78 MB/s 1
I think I will post on qNAP support as soon as possible.
Best regards,
JKB
