Hi! I installed fuse-ntfs-3g-2022.10.3 to read&write on an external HD.
I did this on an i386 laptop and an amd64 one, to double check.. and because I need it on both! I try to read this disk [ 7080.368720] sd0 at scsibus0 target 0 lun 0: <TOSHIBA, STOR.E ALU 2S, 0001> disk fixed [ 7080.378727] sd0: fabricating a geometry [ 7080.378727] sd0: 1397 GB, 1430799 cyl, 64 head, 32 sec, 512 bytes/sect x 2930277168 sectors [ 7080.388733] sd0: fabricating a geometry I mount the disk this way and get the following messages: isengard$ sudo mount.ntfs-3g /dev/sd0e /mnt mount.ntfs-3g: perfuse_open: setsockopt SO_SNDBUF to 2162688 failed: No buffer space available mount.ntfs-3g: perfuse_open: setsockopt SO_RCVBUF to 2162688 failed: No buffer space available mount.ntfs-3g: perfuse_open: setsockopt SO_SNDBUF to 2162688 failed: No buffer space available mount.ntfs-3g: perfuse_open: setsockopt SO_RCVBUF to 2162688 failed: No buffer space available mount.ntfs-3g: perfuse_open: setsockopt SO_SNDBUF to 2162688 failed: No buffer space available mount.ntfs-3g: perfuse_open: setsockopt SO_RCVBUF to 2162688 failed: No buffer space available A quick check with "ls /mnt" shows the expected directories, but if I try to read into a subdirectory, I get a hang. In one attempt, the system did hang, I could not kill applications, only a (soft) power-down helped. Right now I could quit with crl-c, I see that I can't list several first-level directories, but some *do* work. I tried to copy some files... I get a hang. After a second attempt I get a hang I cannot ctrl-c. I see no output nor dmesg with a clue. Ideas? Experiences with 3f NTFS? Riccardo
