El jue, 25 ene 2024 a las 11:28, Matthew Widup (<widu...@proton.me>) escribió: > > I use one of these > https://www.ebay.com/itm/113774031117?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=HZuLHORZQWm&sssrc=4429486&ssuid=rkGEi8qyQi6&var=&widget_ver=artemis&media=COPY > > which is nearly as small as possible, and ridiculously cheap. I don't > normally advocate buying cheap things. > > Granted I don't use it with a Pi. I use it with my Pinebook Pro (actually > multiples of them). But it should work for the Pi just the same. >
Hello, I bought two of other seller, rtl8188 but I think it is not supported. I have two problems. As soon as I connect it the raspberry inmediatly reboots. I think it has something to do with some inrush current. In raspbian also it reboots inmediatley. Once the system reboots, it finds the dongle but cannot be configured: Feb 4 21:58:55 netbsd-raspa /netbsd: [ 1.2002810] ld0: 60874 MB, 7760 cyl, 255 head, 63 sec, 512 bytes/sect x 124669952 sectors Feb 4 21:58:55 netbsd-raspa /netbsd: [ 1.2002810] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz Feb 4 21:58:55 netbsd-raspa /netbsd: [ 1.3004040] sdmmc1: 4-bit width, 50.000 MHz Feb 4 21:58:55 netbsd-raspa /netbsd: [ 1.3004040] bwfm0 at sdmmc1 function 1 Feb 4 21:58:55 netbsd-raspa /netbsd: [ 1.3104370] (manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 2 not configured Feb 4 21:58:55 netbsd-raspa /netbsd: [ 1.7408840] ugen0 at uhub0 port 1 Feb 4 21:58:55 netbsd-raspa /netbsd: [ 1.7408840] ugen0: Realtek (0x0bda) 802.11n (0xf179), rev 2.00/0.00, addr 2 Feb 4 21:58:55 netbsd-raspa /netbsd: [ 1.7408840] uhub0: autoconfiguration error: illegal enable change, port 1 Feb 4 21:58:55 netbsd-raspa /netbsd: [ 1.7408840] swwdog0: software watchdog initialized Feb 4 21:58:55 netbsd-raspa /netbsd: [ 1.7609300] WARNING: 1 error while detecting hardware; check system log. I have googled and perhaps it is rtl8188FTV, I think it is not supported by the driver. Thanks.