When i try to login is just says login incorrect and refused on this terminal
On Mon, 2025-05-19 at 18:01 +0200, Martin Neitzel wrote: > BC> I can't figure out how to use the skey login for telnet > > It's pretty simple. > > (1.) Make sure you have telnet enabled, typically by uncommenting > it in /etc/inetd.conf and "pkill -1 inetd". > > (2.) As the user who wants to make use of SKEYs, run skeyinit once. > You don't need any parameters. > You will have to provide some "secret password" used as some of > the > generators of the SKEY sequences. You can simply reuse your > standard login password or choose a new secret. > > skeyinit will end with some info like: > > ID cartwright skey is otp-md4 100 hack123456 > Next login password: DIRT THUD ABLE IFFY ROVE FUD > > The above is the login access for the first, skey-based login coming > up next, identified by a series id (hack123456) and running number > (100, 99, 98, ...) . You will very likely be interested in a > slightly longer list of the upcoming skeys phrases. Get this by > entering: > > skey -n 10 100 hack123456 > > and your secret when prompted. You can recreate the list any time. > Later on you would be interested in the list going from, say, 90 - > 80. > > (3.) After your skeyinit, login prompts in telnet, rlogin, slogin, > and > you console (whatever is making use of the skey PAM module) will > look > like this: > > Password [ otp-md4 100 hack123456 ]: ____ > > At this point you can either use either your standard password > or > use & burn the next SKEY phrase from you list. For the > "100 hack123456" identifier, you could enter "dirt thud able > iffy > rove fud" (case doesn't matter), and after have used this, you > would be prompted with "Password [ otp-md4 99 hack123456 ]:" > and could use the "99" phrase. > > The beautiful thing is that you can switch between you standard login > password and an skey phrase any time. You don't have to commit to > skeys completely by using them once. Give it a try! > > HTH, Martin
