El 21/9/25 a las 17:18, Benny Siegert escribió:
netbsd-raspa4# cat /boot.cfg
menu=Boot normally:userconf disable ulpt;boot
netbsd-raspa4# dmesg | grep ulpt
[ 3,843112] ulpt0 at uhub2 port 3 configuration 1 interface 0
[ 3,843112] ulpt0: HP (0x03f0) Deskjet D1400 series (0x7904), rev
2.00/1.00, addr 4, iclass 7/1
[ 3,843112] ulpt0: using bi-directional mode
netbsd-raspa4#
Do you boot with Tianocore EDK2 (UEFI)? Do you see the NetBSD bootloader (with
the ASCII art flag) when booting?
If you cannot get the bootloader to do what you want, another solution would be
to compile your own kernel, as I recently did on a RPi3:
https://bentsukun.ch/posts/netbsd-wedge-boot/
—
Benny
Hi Benny,
I use this UEFI for the RPI4:
https://github.com/pftf/RPi4
Yes, I see the NetBSD bootloader in ASCII.
The /boot.cfg file I placed seems to be ignored.
Thanks.
