On Wed, 28 Jan 2026 19:08:32 -0000 (UTC), [email protected] (Michael van Elst)
wrote:
> raidframe collects raid components of a set automatically, these get
> identified
> by the serial number in the raid label and you can move the disks (or just the
> images) around without problem.
Both "raid(4)" and "raidctl(8)" only describe the above in the context of a RAID
set that has been marked for autoconfiguration ('raidctl -A on raidN'). My RAID
set is currently NOT marked for autoconfiguration so it is configured by
'/etc/rc.d/raidframe' running 'raidctl -c /etc/raidN.conf raidN'.
Can you confirm that a non-autoconfigured RAID set is not dependent on the order
of devices listed in the DISKS section of the "raidN.conf" file?
--
John D. Baker
