On Thu, Nov 24, 2005 at 07:45:16AM +1100, Herbert Xu wrote:
> What does ethtool -k say on the e1000 card?
buttercup# ethtool -k eth0
Offload parameters for eth0:
rx-checksumming: on
tx-checksumming: on
scatter-gather: on
tcp segmentation offload: on
> Looks like buttercup is completely offline (this tallies with the tcpdump).
> Please try bringing the interface down and up to see if that makes it work
> again.
Interesting.
One 'ifdown eth0; sleep 10; ifup eth0' got it working again; the scp
transfered 8
more files before stalling out again.
Then, a bunch of 'ifdown eth0; ifup eth0' (no sleep 10 between) had no
effect.
Then, a following ifdown/ifup with an intervening sleep let another 6 files
through before locking up.
> Please also eliminate the cable and switch port as potential problems
> by swapping them.
Will do in a bit, but as everything works fine with 2.6.13-rc1-git7 and earlier
kernels, I don't expect this will be the problem.
Joe
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
