Does /proc/interrupts show the interrupts incrementing for the interface? -Jeb
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Hajo Noerenberg > Sent: Tuesday, February 07, 2006 3:22 AM > To: netdev@vger.kernel.org > Subject: e1000 not working on AMD64 > > > I've bought four new e1000 cards (PCI id 8086:107c, chip label 82541PI), > three of them are working without problems (i386, kernel 2.4.x). > > One of them is installed in an AMD64 SMP system (Athlon dual core 4GB). > It gets detected, link is reported to be up, but no data goes through > (in fact _sometimes_ it succeeds to get an IP adress via DHCP after > 10-20 retries). If I set an IP manually, I am not able to ping any other > host (ping sizes 30bytes ... 1000bytes). > > Tested on kernel 2.6.15, 2.6.16-rc2 and 2.6.16-rc2-git2. > > (Un-)setting NAPI does not change anything. > > Initially I assumed an IRQ-related issue, but the 3ware RAID controller > works without any problems. > > Hajo > > > +++ > > 0000:00:00.0 RAM memory: nVidia Corporation: Unknown device 02f1 (rev a2) > Subsystem: Asustek Computer, Inc.: Unknown device 81bf > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Capabilities: [44] #08 [01e0] > Capabilities: [e0] #08 [a800] > > 0000:00:00.1 RAM memory: nVidia Corporation: Unknown device 02fa (rev a2) > Subsystem: Asustek Computer, Inc.: Unknown device 81bf > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > > 0000:00:00.2 RAM memory: nVidia Corporation: Unknown device 02fe (rev a2) > Subsystem: Asustek Computer, Inc.: Unknown device 81bf > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > > 0000:00:00.3 RAM memory: nVidia Corporation: Unknown device 02f8 (rev a2) > Subsystem: Asustek Computer, Inc.: Unknown device 81bf > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > > 0000:00:00.4 RAM memory: nVidia Corporation: Unknown device 02f9 (rev a2) > Subsystem: Asustek Computer, Inc.: Unknown device 81bf > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > > 0000:00:00.5 RAM memory: nVidia Corporation: Unknown device 02ff (rev a2) > Subsystem: Asustek Computer, Inc.: Unknown device 81bf > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Capabilities: [44] #00 [00fe] > Capabilities: [fc] #00 [0000] > > 0000:00:00.6 RAM memory: nVidia Corporation: Unknown device 027f (rev a2) > Subsystem: Asustek Computer, Inc.: Unknown device 81bf > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > > 0000:00:00.7 RAM memory: nVidia Corporation: Unknown device 027e (rev a2) > Subsystem: Asustek Computer, Inc.: Unknown device 81bf > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > > 0000:00:02.0 PCI bridge: nVidia Corporation: Unknown device 02fc (rev > a1) (prog-if 00 [Normal decode]) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 0x10 (64 bytes) > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000- > 0000000000000000 > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > Capabilities: [40] #0d [0000] > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] Message Signalled Interrupts: 64bit+ > Queue=0/1 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [60] #08 [a800] > Capabilities: [80] #10 [0141] > > 0000:00:03.0 PCI bridge: nVidia Corporation: Unknown device 02fd (rev > a1) (prog-if 00 [Normal decode]) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 0x10 (64 bytes) > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000- > 0000000000000000 > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > Capabilities: [40] #0d [0000] > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] Message Signalled Interrupts: 64bit+ > Queue=0/1 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [60] #08 [a800] > Capabilities: [80] #10 [0141] > > 0000:00:04.0 PCI bridge: nVidia Corporation: Unknown device 02fb (rev > a1) (prog-if 00 [Normal decode]) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 0x10 (64 bytes) > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000- > 0000000000000000 > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > Capabilities: [40] #0d [0000] > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] Message Signalled Interrupts: 64bit+ > Queue=0/1 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [60] #08 [a800] > Capabilities: [80] #10 [0141] > > 0000:00:05.0 VGA compatible controller: nVidia Corporation: Unknown > device 0242 (rev a2) (prog-if 00 [VGA]) > Subsystem: Asustek Computer, Inc.: Unknown device 81bf > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] > Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] > Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M] > Expansion ROM at febe0000 [disabled] [size=128K] > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] Message Signalled Interrupts: 64bit+ > Queue=0/0 Enable- > Address: 0000000000000000 Data: 0000 > > 0000:00:09.0 RAM memory: nVidia Corporation: Unknown device 0270 (rev a2) > Subsystem: Asustek Computer, Inc.: Unknown device 81c0 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Capabilities: [44] #08 [01e9] > Capabilities: [e0] #08 [a801] > > 0000:00:0a.0 ISA bridge: nVidia Corporation: Unknown device 0261 (rev a2) > Subsystem: Asustek Computer, Inc.: Unknown device 81c0 > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > > 0000:00:0a.1 SMBus: nVidia Corporation: Unknown device 0264 (rev a2) > Subsystem: Asustek Computer, Inc.: Unknown device 81c0 > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin A routed to IRQ 5 > Region 4: I/O ports at 0600 [size=64] > Region 5: I/O ports at 0700 [size=64] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 0000:00:0d.0 IDE interface: nVidia Corporation: Unknown device 0265 (rev > a1) (prog-if 8a [Master SecP PriP]) > Subsystem: Asustek Computer, Inc.: Unknown device 81c0 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 (750ns min, 250ns max) > Region 4: I/O ports at ffa0 [size=16] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 0000:00:10.0 PCI bridge: nVidia Corporation: Unknown device 026f (rev > a2) (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Bus: primary=00, secondary=04, subordinate=04, sec-latency=64 > I/O behind bridge: 0000c000-0000cfff > Memory behind bridge: f9a00000-faafffff > Prefetchable memory behind bridge: 80000000-800fffff > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > Capabilities: [b8] #0d [0000] > Capabilities: [8c] #08 [a800] > > 0000:00:14.0 Bridge: nVidia Corporation: Unknown device 0269 (rev a1) > Subsystem: Asustek Computer, Inc.: Unknown device 816a > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 (250ns min, 5000ns max) > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at febdc000 (32-bit, non-prefetchable) [size=4K] > Region 1: I/O ports at dc00 [size=8] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable+ DSel=0 DScale=0 PME- > > 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Capabilities: [80] #08 [2101] > > 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > > 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > > 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > > 0000:04:08.0 Ethernet controller: Intel Corp.: Unknown device 107c (rev 05) > Subsystem: Intel Corp.: Unknown device 1376 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (63750ns min), Cache Line Size: 0x10 (64 bytes) > Interrupt: pin A routed to IRQ 17 > Region 0: Memory at faae0000 (32-bit, non-prefetchable) [size=128K] > Region 1: Memory at faac0000 (32-bit, non-prefetchable) [size=128K] > Region 2: I/O ports at cc00 [size=64] > Expansion ROM at 80000000 [disabled] [size=128K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [e4] PCI-X non-bridge device. > Command: DPERE- ERO+ RBC=0 OST=0 > Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, > DC=simple, DMMRBC=2, DMOST=0, DMCRS=0, RSCEM- > > 0000:04:09.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID > (rev 01) > Subsystem: 3ware Inc 3ware Inc 3ware 7xxx/8xxx-series PATA/SATA- > RAID > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (2250ns min), Cache Line Size: 0x10 (64 bytes) > Interrupt: pin A routed to IRQ 16 > Region 0: I/O ports at c880 [size=16] > Region 1: Memory at faa9fc00 (32-bit, non-prefetchable) [size=16] > Region 2: Memory at fa000000 (32-bit, non-prefetchable) [size=8M] > Expansion ROM at 80020000 [disabled] [size=64K] > Capabilities: [40] Power Management version 1 > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > +++ > > processor : 0 > vendor_id : AuthenticAMD > cpu family : 15 > model : 35 > model name : AMD Athlon(tm)64 X2 Dual Core Processor 3800+ > stepping : 2 > cpu MHz : 2009.205 > cache size : 512 KB > physical id : 0 > siblings : 2 > core id : 0 > cpu cores : 2 > fpu : yes > fpu_exception : yes > cpuid level : 1 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge > mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext > fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy > bogomips : 4025.45 > TLB size : 1024 4K pages > clflush size : 64 > cache_alignment : 64 > address sizes : 40 bits physical, 48 bits virtual > power management: ts fid vid ttp > > processor : 1 > vendor_id : AuthenticAMD > cpu family : 15 > model : 35 > model name : AMD Athlon(tm)64 X2 Dual Core Processor 3800+ > stepping : 2 > cpu MHz : 2009.205 > cache size : 512 KB > physical id : 0 > siblings : 2 > core id : 1 > cpu cores : 2 > fpu : yes > fpu_exception : yes > cpuid level : 1 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge > mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext > fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy > bogomips : 4018.56 > TLB size : 1024 4K pages > clflush size : 64 > cache_alignment : 64 > address sizes : 40 bits physical, 48 bits virtual > power management: ts fid vid ttp > > +++ > > CPU0 CPU1 > 0: 117 58601 IO-APIC-edge timer > 1: 0 8 IO-APIC-edge i8042 > 8: 0 0 IO-APIC-edge rtc > 9: 0 0 IO-APIC-level acpi > 16: 3 964 IO-APIC-level 3w-xxxx > 17: 0 1 IO-APIC-level eth0 > 18: 11 22648 IO-APIC-level eth1 > NMI: 57 34 > LOC: 58672 58649 > ERR: 0 > MIS: 0 > > +++ > - > To unsubscribe from this list: send the line "unsubscribe netdev" in > the body of a message to [EMAIL PROTECTED] > More majordomo info at http://vger.kernel.org/majordomo-info.html - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
