Turn on truncation to prevent getting choked by frames larger than expected.
Without this fix, driver hangs after receiving an oversize packet.
Signed-off-by: Stephen Hemminger <[EMAIL PROTECTED]>
--- sky2-1.0.orig/drivers/net/sky2.c 2006-03-06 09:59:11.000000000 -0800
+++ sky2-1.0/drivers/net/sky2.c 2006-03-06 09:59:12.000000000 -0800
@@ -618,8 +618,8 @@
/* Configure Rx MAC FIFO */
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
- sky2_write16(hw, SK_REG(port, RX_GMF_CTRL_T),
- GMF_RX_CTRL_DEF);
+ sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
+ GMF_OPER_ON | GMF_RX_F_FL_ON);
/* Flush Rx MAC FIFO on any flow control or error */
sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
@@ -965,8 +965,12 @@
sky2_rx_add(sky2, re->mapaddr);
}
+ /* Truncate oversize frames */
+ sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), sky2->rx_bufsize -
8);
+ sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
+
/* Tell chip about available buffers */
- sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put);
+ sky2_put_idx(hw, rxq, sky2->rx_put);
return 0;
nomem:
sky2_rx_clean(sky2);
@@ -1680,10 +1684,12 @@
#define roundup(x, y) ((((x)+((y)-1))/(y))*(y))
-/* Want receive buffer size to be multiple of 64 bits, and incl room for vlan
*/
+/* Want receive buffer size to be multiple of 64 bits
+ * and incl room for vlan and truncation
+ */
static inline unsigned sky2_buf_size(int mtu)
{
- return roundup(mtu + ETH_HLEN + 4, 8);
+ return roundup(mtu + ETH_HLEN + VLAN_HLEN, 8) + 8;
}
static int sky2_change_mtu(struct net_device *dev, int new_mtu)
@@ -1766,7 +1772,7 @@
if (!(status & GMR_FS_RX_OK))
goto resubmit;
- if ((status >> 16) != length || length > sky2->rx_bufsize)
+ if (length > sky2->netdev->mtu + ETH_HLEN)
goto oversize;
if (length < copybreak) {
--
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
