On 2/29/2016 5:18 PM, Gabriel Fernandez wrote:
This patch manages the case when you have an Ethernet MAC with
a "fixed link", and not connected to a normal MDIO-managed PHY device.

The test of phy_bus_name was not helpful because it was never affected
and replaced by the mdio test node.

Signed-off-by: Gabriel Fernandez <gabriel.fernan...@linaro.org>

Acked-by: Giuseppe Cavallaro <peppe.cavall...@st.com>

---
  drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c     | 11 +----------
  drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c |  9 ++++++++-
  include/linux/stmmac.h                                |  1 +
  3 files changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c 
b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 0faf163..efb54f3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -199,21 +199,12 @@ int stmmac_mdio_register(struct net_device *ndev)
        struct stmmac_priv *priv = netdev_priv(ndev);
        struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
        int addr, found;
-       struct device_node *mdio_node = NULL;
-       struct device_node *child_node = NULL;
+       struct device_node *mdio_node = priv->plat->mdio_node;

        if (!mdio_bus_data)
                return 0;

        if (IS_ENABLED(CONFIG_OF)) {
-               for_each_child_of_node(priv->device->of_node, child_node) {
-                       if (of_device_is_compatible(child_node,
-                                                   "snps,dwmac-mdio")) {
-                               mdio_node = child_node;
-                               break;
-                       }
-               }
-
                if (mdio_node) {
                        netdev_dbg(ndev, "FOUND MDIO subnode\n");
                } else {
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c 
b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 6a52fa1..4514ba7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -110,6 +110,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, const 
char **mac)
        struct device_node *np = pdev->dev.of_node;
        struct plat_stmmacenet_data *plat;
        struct stmmac_dma_cfg *dma_cfg;
+       struct device_node *child_node = NULL;

        plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
        if (!plat)
@@ -140,13 +141,19 @@ stmmac_probe_config_dt(struct platform_device *pdev, 
const char **mac)
                plat->phy_node = of_node_get(np);
        }

+       for_each_child_of_node(np, child_node)
+               if (of_device_is_compatible(child_node, "snps,dwmac-mdio")) {
+                       plat->mdio_node = child_node;
+                       break;
+               }
+
        /* "snps,phy-addr" is not a standard property. Mark it as deprecated
         * and warn of its use. Remove this when phy node support is added.
         */
        if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
                dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");

-       if ((plat->phy_node && !of_phy_is_fixed_link(np)) || plat->phy_bus_name)
+       if ((plat->phy_node && !of_phy_is_fixed_link(np)) || !plat->mdio_node)
                plat->mdio_bus_data = NULL;
        else
                plat->mdio_bus_data =
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index eead8ab..881a79d 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -100,6 +100,7 @@ struct plat_stmmacenet_data {
        int interface;
        struct stmmac_mdio_bus_data *mdio_bus_data;
        struct device_node *phy_node;
+       struct device_node *mdio_node;
        struct stmmac_dma_cfg *dma_cfg;
        int clk_csr;
        int has_gmac;


Reply via email to