Commit 13a56b44 ("at803x: Add support for hardware reset") added a
work-around for a hardware bug on the AT8030. However, the work-around
was being called for all 803x PHYs, even those that don't need it.
Function at803x_link_change_notify() checks to make sure that it only
resets the PHY on the 8030, but it makes more sense to not call that
function at all if it isn't needed.
Signed-off-by: Timur Tabi <[email protected]>
---
drivers/net/phy/at803x.c | 40 ++++++++++++++++++----------------------
1 file changed, 18 insertions(+), 22 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index b3ffaee..f279a89 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -359,27 +359,25 @@ static void at803x_link_change_notify(struct phy_device
*phydev)
* in the FIFO. In such cases, the FIFO enters an error mode it
* cannot recover from by software.
*/
- if (phydev->drv->phy_id == ATH8030_PHY_ID) {
- if (phydev->state == PHY_NOLINK) {
- if (priv->gpiod_reset && !priv->phy_reset) {
- struct at803x_context context;
-
- at803x_context_save(phydev, &context);
-
- gpiod_set_value(priv->gpiod_reset, 1);
- msleep(1);
- gpiod_set_value(priv->gpiod_reset, 0);
- msleep(1);
-
- at803x_context_restore(phydev, &context);
-
- phydev_dbg(phydev, "%s(): phy was reset\n",
- __func__);
- priv->phy_reset = true;
- }
- } else {
- priv->phy_reset = false;
+ if (phydev->state == PHY_NOLINK) {
+ if (priv->gpiod_reset && !priv->phy_reset) {
+ struct at803x_context context;
+
+ at803x_context_save(phydev, &context);
+
+ gpiod_set_value(priv->gpiod_reset, 1);
+ msleep(1);
+ gpiod_set_value(priv->gpiod_reset, 0);
+ msleep(1);
+
+ at803x_context_restore(phydev, &context);
+
+ phydev_dbg(phydev, "%s(): phy was reset\n",
+ __func__);
+ priv->phy_reset = true;
}
+ } else {
+ priv->phy_reset = false;
}
}
@@ -391,7 +389,6 @@ static struct phy_driver at803x_driver[] = {
.phy_id_mask = 0xffffffef,
.probe = at803x_probe,
.config_init = at803x_config_init,
- .link_change_notify = at803x_link_change_notify,
.set_wol = at803x_set_wol,
.get_wol = at803x_get_wol,
.suspend = at803x_suspend,
@@ -427,7 +424,6 @@ static struct phy_driver at803x_driver[] = {
.phy_id_mask = 0xffffffef,
.probe = at803x_probe,
.config_init = at803x_config_init,
- .link_change_notify = at803x_link_change_notify,
.set_wol = at803x_set_wol,
.get_wol = at803x_get_wol,
.suspend = at803x_suspend,
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.
