Hello.
On 04/24/2016 07:16 PM, Yoshihiro Kaneko wrote:
From: Kazuya Mizuguchi <kazuya.mizuguchi...@renesas.com>
Aligning the reception data size is not required.
OK, the gen 2/3 manuals indeed don't require this. I assume the patch has
been tested...
Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi...@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0...@gmail.com>
I have a few comments though...
diff --git a/drivers/net/ethernet/renesas/ravb_main.c
b/drivers/net/ethernet/renesas/ravb_main.c
index 238b56f..66ed80c 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -246,10 +246,10 @@ static void ravb_ring_format(struct net_device *ndev, int
q)
for (i = 0; i < priv->num_rx_ring[q]; i++) {
/* RX descriptor */
rx_desc = &priv->rx_ring[q][i];
- /* The size of the buffer should be on 16-byte boundary. */
- rx_desc->ds_cc = cpu_to_le16(ALIGN(PKT_BUF_SZ, 16));
- dma_addr = dma_map_single(ndev->dev.parent,
priv->rx_skb[q][i]->data,
- ALIGN(PKT_BUF_SZ, 16),
+ rx_desc->ds_cc = cpu_to_le16(PKT_BUF_SZ);
+ dma_addr = dma_map_single(ndev->dev.parent,
+ priv->rx_skb[q][i]->data,
Please don't reformat the lines above.
+ PKT_BUF_SZ,
DMA_FROM_DEVICE);
/* We just set the data size to 0 for a failed mapping which
* should prevent DMA from happening...
@@ -557,8 +557,9 @@ static bool ravb_rx(struct net_device *ndev, int *quota,
int q)
skb = priv->rx_skb[q][entry];
priv->rx_skb[q][entry] = NULL;
- dma_unmap_single(ndev->dev.parent,
le32_to_cpu(desc->dptr),
- ALIGN(PKT_BUF_SZ, 16),
+ dma_unmap_single(ndev->dev.parent,
+ le32_to_cpu(desc->dptr),
Same here.
[...]
MBR, Sergei
