Lino Sanfilippo <linosanfili...@gmx.de> :
[...]
> what about the (only compile tested) code below?
I may have misunderstood some parts but it nonetheless seems broken.
> The smp_wmb() in tx function combined with the smp_rmb() in tx_clean ensures
> that the CPU running tx_clean sees consistent values for info, data and skb
> (thus no need to check for validity of all three values any more).
> The mb() fulfills several tasks:
> 1. makes sure that DMA writes to descriptor are completed before the HW is
> informed.
"DMA writes" == "CPU writes" ?
> 2. On multi processor systems: ensures that txbd_curr is updated (this is
> paired
> with the smp_mb() at the end of tx_clean).
Smells like using barrier side-effects to control smp coherency. It isn't
the recommended style.
> 3. Ensure we see the most recent value for tx_dirty. With this we do not have
> to
> recheck after we stopped the tx queue.
>
>
> --- a/drivers/net/ethernet/arc/emac_main.c
> +++ b/drivers/net/ethernet/arc/emac_main.c
> @@ -162,8 +162,13 @@ static void arc_emac_tx_clean(struct net_device *ndev)
> struct sk_buff *skb = tx_buff->skb;
> unsigned int info = le32_to_cpu(txbd->info);
>
> - if ((info & FOR_EMAC) || !txbd->data || !skb)
> + if (info & FOR_EMAC) {
> + /* Make sure we see consistent values for info, skb
> + * and data.
> + */
> + smp_rmb();
> break;
> + }
?
smp_rmb should appear before the variables you want coherency for.
>
> if (unlikely(info & (DROP | DEFR | LTCL | UFLO))) {
> stats->tx_errors++;
> @@ -679,36 +684,33 @@ static int arc_emac_tx(struct sk_buff *skb, struct
> net_device *ndev)
> dma_unmap_addr_set(&priv->tx_buff[*txbd_curr], addr, addr);
> dma_unmap_len_set(&priv->tx_buff[*txbd_curr], len, len);
>
> - priv->txbd[*txbd_curr].data = cpu_to_le32(addr);
>
> - /* Make sure pointer to data buffer is set */
> - wmb();
> + priv->txbd[*txbd_curr].data = cpu_to_le32(addr);
> + priv->tx_buff[*txbd_curr].skb = skb;
>
> - skb_tx_timestamp(skb);
> + /* Make sure info is set after data and skb with respect to
> + * other tx_clean().
> + */
> + smp_wmb();
>
> *info = cpu_to_le32(FOR_EMAC | FIRST_OR_LAST_MASK | len);
Afaik smp_wmb() does not imply wmb(). So priv->txbd[*txbd_curr].data and
*info (aka priv->txbd[*txbd_curr].info) are not necessarily written in
an orderly manner.
>
> - /* Make sure info word is set */
> - wmb();
> -
> - priv->tx_buff[*txbd_curr].skb = skb;
> -
> /* Increment index to point to the next BD */
> *txbd_curr = (*txbd_curr + 1) % TX_BD_NUM;
With this change it's possible that tx_clean() reads new value for
tx_curr and old value (0) for *info.
>
> - /* Ensure that tx_clean() sees the new txbd_curr before
> + /* 1.Ensure that tx_clean() sees the new txbd_curr before
> * checking the queue status. This prevents an unneeded wake
> * of the queue in tx_clean().
> + * 2.Ensure that all values are written to RAM and to DMA
> + * before hardware is informed.
(I am not sure what "DMA" is supposed to mean here.)
> + * 3.Ensure we see the most recent value for tx_dirty.
> */
> - smp_mb();
> + mb();
>
> - if (!arc_emac_tx_avail(priv)) {
> + if (!arc_emac_tx_avail(priv))
> netif_stop_queue(ndev);
> - /* Refresh tx_dirty */
> - smp_mb();
> - if (arc_emac_tx_avail(priv))
> - netif_start_queue(ndev);
> - }
Xmit thread | Clean thread
mb();
arc_emac_tx_avail() test with old
tx_dirty - tx_clean has not issued
any mb yet - and new tx_curr
smp_mb();
if (netif_queue_stopped(ndev) && ...
netif_wake_queue(ndev);
netif_stop_queue()
-> queue stopped.
You can't remove the revalidation step.
arc_emac_tx_avail() is essentially pessimistic. Even if arc_emac_tx_avail()
was "right", there would be a tx_clean window between arc_emac_tx_avail()
and netif_stop_queue().
> +
> + skb_tx_timestamp(skb);
You don't want to issue skb_tx_timestamp after releasing control of the
descriptor (*info = ...): skb may be long gone.
--
Ueimor
