Hi Hauke, find my comments in-line.
Am 22.05.2016 um 21:33 schrieb Hauke Mehrtens:
Supports the Lantiq / Intel CHD 11G and 22E PHYs. These PHYs are also named PEF 7061, PEF 7071, PEF 7072 Signed-off-by: John Crispin <j...@phrozen.org> Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de> --- This is based on a driver from OpenWrt / LEDE. This is send as a RFC because the merge window is open now and it adds a new driver. This patch was cleaned up on request of Alexander. .../devicetree/bindings/phy/phy-lanitq.txt | 216 +++++++++++++++++
Looks like a typo in the filename. lantiq != lanitq
drivers/net/phy/Kconfig | 6 + drivers/net/phy/Makefile | 1 + drivers/net/phy/lantiq.c | 269 +++++++++++++++++++++ 4 files changed, 492 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-lanitq.txt create mode 100644 drivers/net/phy/lantiq.c diff --git a/Documentation/devicetree/bindings/phy/phy-lanitq.txt b/Documentation/devicetree/bindings/phy/phy-lanitq.txt new file mode 100644 index 0000000..d9746e8 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-lanitq.txt @@ -0,0 +1,216 @@ +Lanitq PHY binding
Same typo as mentioned above.
+============================================
+
+This devicetree binding controls the lantiq ethernet phys led functionality.
+
+Example:
+ mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+ phy5: ethernet-phy@5 {
+ reg = <0x1>;
+ compatible = "lantiq,phy11g",
"ethernet-phy-ieee802.3-c22";
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy22f",
"ethernet-phy-ieee802.3-c22";
+ lantiq,led2h = <0x00>;
+ lantiq,led2l = <0x03>;
+ };
+ phy12: ethernet-phy@12 {
+ reg = <0x12>;
+ compatible = "lantiq,phy22f",
"ethernet-phy-ieee802.3-c22";
+ lantiq,led1h = <0x00>;
+ lantiq,led1l = <0x03>;
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy22f",
"ethernet-phy-ieee802.3-c22";
+ lantiq,led2h = <0x00>;
+ lantiq,led2l = <0x03>;
+ };
+ phy14: ethernet-phy@14 {
+ reg = <0x14>;
+ compatible = "lantiq,phy22f",
"ethernet-phy-ieee802.3-c22";
+ lantiq,led1h = <0x00>;
+ lantiq,led1l = <0x03>;
+ };
+ };
+
+Register Description
+============================================
+
+LEDCH:
+
+Name Hardware Reset Value
+LEDCH 0x00C5
+
+| 15 | | | | | | | 8 |
+=========================================
+| RES |
+=========================================
+
+| 7 | | | | | | | 0 |
+=========================================
+| FBF | SBF |RES | NACS |
+=========================================
+
+Field Bits Type Description
+FBC 7:6 RW Fast Blink Frequency
+ ---
+ 0x0 (00b) F02HZ 2 Hz blinking frequency
+ 0x1 (01b) F04HZ 4 Hz blinking frequency
+ 0x2 (10b) F08HZ 8 Hz blinking frequency
+ 0x3 (11b) F16HZ 16 Hz blinking frequency
+
+SBF 5:4 RW Slow Blink Frequency
+ ---
+ 0x0 (00b) F02HZ 2 Hz blinking frequency
+ 0x1 (01b) F04HZ 4 Hz blinking frequency
+ 0x2 (10b) F08HZ 8 Hz blinking frequency
+ 0x3 (11b) F16HZ 16 Hz blinking frequency
+
+NACS 2:0 RW Inverse of Scan Function
+ ---
+ 0x0 (000b) NONE No Function
+ 0x1 (001b) LINK Complex function enabled when link is up
+ 0x2 (010b) PDOWN Complex function enabled when device
is powered-down
+ 0x3 (011b) EEE Complex function enabled when device is
in EEE mode
+ 0x4 (100b) ANEG Complex function enabled when
auto-negotiation is running
+ 0x5 (101b) ABIST Complex function enabled when analog
self-test is running
+ 0x6 (110b) CDIAG Complex function enabled when cable
diagnostics are running
+ 0x7 (111b) TEST Complex function enabled when test mode
is running
+
+LEDCL:
+
+Name Hardware Reset Value
+LEDCL 0x0067
+
+| 15 | | | | | | | 8 |
+=========================================
+| RES |
+=========================================
+
+| 7 | | | | | | | 0 |
+=========================================
+|RES | SCAN |RES | CBLINK |
+=========================================
+
+Field Bits Type Description
+SCAN 6:4 RW Complex Scan Configuration
+ ---
+ 000 B NONE No Function
+ 001 B LINK Complex function enabled when link is up
+ 010 B PDOWN Complex function enabled when device is
powered-down
+ 011 B EEE Complex function enabled when device is in
EEE mode
+ 100 B ANEG Complex function enabled when
auto-negotiation is running
+ 101 B ABIST Complex function enabled when analog
self-test is running
+ 110 B CDIAG Complex function enabled when cable
diagnostics are running
+ 111 B TEST Complex function enabled when test mode is
running
+
+CBLINK 2:0 RW Complex Blinking Configuration
+ ---
+ 000 B NONE No Function
+ 001 B LINK Complex function enabled when link is up
+ 010 B PDOWN Complex function enabled when device is
powered-down
+ 011 B EEE Complex function enabled when device is in
EEE mode
+ 100 B ANEG Complex function enabled when
auto-negotiation is running
+ 101 B ABIST Complex function enabled when analog
self-test is running
+ 110 B CDIAG Complex function enabled when cable
diagnostics are running
+ 111 B TEST Complex function enabled when test mode is
running
+
+LEDxH:
+
+Name Hardware Reset Value
+LED0H 0x0070
+LED1H 0x0020
+LED2H 0x0040
+LED3H 0x0040
+
+| 15 | | | | | | | 8 |
+=========================================
+| RES |
+=========================================
+
+| 7 | | | | | | | 0 |
+=========================================
+| CON | BLINKF |
+=========================================
+
+Field Bits Type Description
+CON 7:4 RW Constant On Configuration
+ ---
+ 0x0 (0000b) NONE LED does not light up constantly
+ 0x1 (0001b) LINK10 LED is on when link is 10 Mbit/s
+ 0x2 (0010b) LINK100 LED is on when link is 100 Mbit/s
+ 0x3 (0011b) LINK10X LED is on when link is 10/100 Mbit/s
+ 0x4 (0100b) LINK1000 LED is on when link is 1000 Mbit/s
+ 0x5 (0101b) LINK10_0 LED is on when link is 10/1000
Mbit/s
+ 0x6 (0110b) LINK100X LED is on when link is 100/1000
Mbit/s
+ 0x7 (0111b) LINK10XX LED is on when link is 10/100/1000
Mbit/s
+ 0x8 (1000b) PDOWN LED is on when device is powered-down
+ 0x9 (1001b) EEE LED is on when device is in EEE mode
+ 0xA (1010b) ANEG LED is on when auto-negotiation is
running
+ 0xB (1011b) ABIST LED is on when analog self-test is
running
+ 0xC (1100b) CDIAG LED is on when cable diagnostics are
running
+
+BLINKF 3:0 RW Fast Blinking Configuration
+ ---
+ 0x0 (0000b) NONE No Blinking
+ 0x1 (0001b) LINK10 Blink when link is 10 Mbit/s
+ 0x2 (0010b) LINK100 Blink when link is 100 Mbit/s
+ 0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s
+ 0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s
+ 0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s
+ 0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s
+ 0x7 (0111b) LINK10XX Blink when link is 10/100/1000
Mbit/s
+ 0x8 (1000b) PDOWN Blink when device is powered-down
+ 0x9 (1001b) EEE Blink when device is in EEE mode
+ 0xA (1010b) ANEG Blink when auto-negotiation is running
+ 0xB (1011b) ABIST Blink when analog self-test is running
+ 0xC (1100b) CDIAG Blink when cable diagnostics are
running
+
+LEDxL:
+
+Name Hardware Reset Value
+LED0L 0x0003
+LED1L 0x0000
+LED2L 0x0000
+LED3L 0x0020
+
+| 15 | | | | | | | 8 |
+=========================================
+| RES |
+=========================================
+
+| 7 | | | | | | | 0 |
+=========================================
+| BLINKS | PULSE |
+=========================================
+
+Field Bits Type Description
+BLINKS 7:4 RW Slow Blinkin Configuration
+ ---
+ 0x0 (0000b) NONE No Blinking
+ 0x1 (0001b) LINK10 Blink when link is 10 Mbit/s
+ 0x2 (0010b) LINK100 Blink when link is 100 Mbit/s
+ 0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s
+ 0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s
+ 0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s
+ 0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s
+ 0x7 (0111b) LINK10XX Blink when link is 10/100/1000
Mbit/s
+ 0x8 (1000b) PDOWN Blink when device is powered-down
+ 0x9 (1001b) EEE Blink when device is in EEE mode
+ 0xA (1010b) ANEG Blink when auto-negotiation is running
+ 0xB (1011b) ABIST Blink when analog self-test is running
+ 0xC (1100b) CDIAG Blink when cable diagnostics are
runningning
+
+PULSE 3:0 RW Pulsing Configuration
+ The pulse field is a mask field by which certain events
can be combined
+ ---
+ 0x0 (0000b) NONE No pulsing
+ 0x1 (0001b) TXACT Transmit activity
+ 0x2 (0010b) RXACT Receive activity
+ 0x4 (0100b) COL Collision
+ 0x8 (1000b) RES Reserved
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index f0a7702..f3685ef 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -257,6 +257,12 @@ config MDIO_BCM_IPROC
This module provides a driver for the MDIO busses found in the
Broadcom iProc SoC's.
+config LANTIQ_PHY
+ tristate "Driver for Lantiq PHYs"
+ ---help---
+ Supports the Lantiq / Intel CHD 11G and 22E PHYs.
+ These PHYs are also named PEF 7061, PEF 7071 and PEF 7072
+
endif # PHYLIB
config MICREL_KS8995MA
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 680e88f9..042b0ef6 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -42,3 +42,4 @@ obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
obj-$(CONFIG_MICROCHIP_PHY) += microchip.o
obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
+obj-$(CONFIG_LANTIQ_PHY) += lantiq.o
diff --git a/drivers/net/phy/lantiq.c b/drivers/net/phy/lantiq.c
new file mode 100644
index 0000000..65a8086
--- /dev/null
+++ b/drivers/net/phy/lantiq.c
@@ -0,0 +1,269 @@
+/*
+ * Copyright (C) 2012 Daniel Schwierzeck <daniel.schwierz...@googlemail.com>
+ * Copyright (C) 2016 Hauke Mehrtens <ha...@hauke-m.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mdio.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/of.h>
+
+#define MII_VR9_11G_IMASK 0x19 /* interrupt mask */
+#define MII_VR9_11G_ISTAT 0x1a /* interrupt status */
+
+#define INT_VR9_11G_WOL BIT(15) /* Wake-On-LAN */
+#define INT_VR9_11G_ANE BIT(11) /* Auto-Neg error */
+#define INT_VR9_11G_ANC BIT(10) /* Auto-Neg complete */
+#define INT_VR9_11G_ADSC BIT(5) /* Link auto-downspeed detect */
+#define INT_VR9_11G_DXMC BIT(2) /* Duplex mode change */
+#define INT_VR9_11G_LSPC BIT(1) /* Link speed change */
+#define INT_VR9_11G_LSTC BIT(0) /* Link state change */
+#define INT_VR9_11G_MASK (INT_VR9_11G_LSTC | INT_VR9_11G_ADSC)
+
+#define ADVERTISED_MPD BIT(10) /* Multi-port device */
+
+#define PHY_ID_PHY11G_1_3 0x030260D1
+#define PHY_ID_PHY22F_1_3 0x030260E1
+#define PHY_ID_PHY11G_1_4 0xD565A400
+#define PHY_ID_PHY22F_1_4 0xD565A410
+#define PHY_ID_PHY11G_1_5 0xD565A401
+#define PHY_ID_PHY22F_1_5 0xD565A411
+
+static void lantiq_gphy_of_reg_init(struct phy_device *phydev)
+{
+ struct device_node *node = phydev->mdio.dev.of_node;
+ u32 tmp;
+
+ if (!IS_ENABLED(CONFIG_OF_MDIO))
+ return;
+
+ /* store the led values if one was passed by the device tree */
+ if (!of_property_read_u32(node, "lantiq,ledch", &tmp))
+ phy_write_mmd_indirect(phydev, 0x1e0, MDIO_MMD_VEND2, tmp);
+
+ if (!of_property_read_u32(node, "lantiq,ledcl", &tmp))
+ phy_write_mmd_indirect(phydev, 0x1e1, MDIO_MMD_VEND2, tmp);
+
+ if (!of_property_read_u32(node, "lantiq,led0h", &tmp))
+ phy_write_mmd_indirect(phydev, 0x1e2, MDIO_MMD_VEND2, tmp);
+
+ if (!of_property_read_u32(node, "lantiq,led0l", &tmp))
+ phy_write_mmd_indirect(phydev, 0x1e3, MDIO_MMD_VEND2, tmp);
+
+ if (!of_property_read_u32(node, "lantiq,led1h", &tmp))
+ phy_write_mmd_indirect(phydev, 0x1e4, MDIO_MMD_VEND2, tmp);
+
+ if (!of_property_read_u32(node, "lantiq,led1l", &tmp))
+ phy_write_mmd_indirect(phydev, 0x1e5, MDIO_MMD_VEND2, tmp);
+
+ if (!of_property_read_u32(node, "lantiq,led2h", &tmp))
+ phy_write_mmd_indirect(phydev, 0x1e6, MDIO_MMD_VEND2, tmp);
+
+ if (!of_property_read_u32(node, "lantiq,led2l", &tmp))
+ phy_write_mmd_indirect(phydev, 0x1e7, MDIO_MMD_VEND2, tmp);
+
+ /* The LED3 is only available in PEF 7072 package. */
+ if (!of_property_read_u32(node, "lantiq,led3h", &tmp))
+ phy_write_mmd_indirect(phydev, 0x1e8, MDIO_MMD_VEND2, tmp);
+
+ if (!of_property_read_u32(node, "lantiq,led3l", &tmp))
+ phy_write_mmd_indirect(phydev, 0x1e9, MDIO_MMD_VEND2, tmp);
+}
+
+static int lantiq_gphy_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ /* Mask all interrupts */
+ err = phy_write(phydev, MII_VR9_11G_IMASK, 0);
+ if (err)
+ return err;
+
+ /* Clear all pending interrupts */
+ phy_read(phydev, MII_VR9_11G_ISTAT);
+
+ phy_write_mmd_indirect(phydev, 0x1e0, MDIO_MMD_VEND2, 0xc5);
+ phy_write_mmd_indirect(phydev, 0x1e1, MDIO_MMD_VEND2, 0x67);
Any specific reason why the complex functions are enabled by default?
+ phy_write_mmd_indirect(phydev, 0x1e2, MDIO_MMD_VEND2, 0x42); + phy_write_mmd_indirect(phydev, 0x1e3, MDIO_MMD_VEND2, 0x10); + phy_write_mmd_indirect(phydev, 0x1e4, MDIO_MMD_VEND2, 0x70); + phy_write_mmd_indirect(phydev, 0x1e5, MDIO_MMD_VEND2, 0x03); + phy_write_mmd_indirect(phydev, 0x1e6, MDIO_MMD_VEND2, 0x20); + phy_write_mmd_indirect(phydev, 0x1e7, MDIO_MMD_VEND2, 0x00); + phy_write_mmd_indirect(phydev, 0x1e8, MDIO_MMD_VEND2, 0x40); + phy_write_mmd_indirect(phydev, 0x1e9, MDIO_MMD_VEND2, 0x20);
I would suggest to use the same blink/permanent on configuration for all led pins (as it is in LEDE/OpenWrt):
Constant On: 10/100/1000MBit
Blink Fast: None
Blink Slow: None
Pulse: TX/RX
I'm aware of only one CPE that uses more than one led for status
indication. All other have a single led attached to any of the pins.
This way it's only required to change the default configuration via the device tree bindings for the minority of the devices.
+
+ lantiq_gphy_of_reg_init(phydev);
+
+ return 0;
+}
+
+static int lantiq_gphy14_config_aneg(struct phy_device *phydev)
+{
+ int reg, err;
+
+ /* Advertise as multi-port device, see IEEE802.3-2002 40.5.1.1 */
+ /* This is a workaround for an errata in rev < 1.5 devices */
+ reg = phy_read(phydev, MII_CTRL1000);
+ reg |= ADVERTISED_MPD;
+ err = phy_write(phydev, MII_CTRL1000, reg);
+ if (err)
+ return err;
+
+ return genphy_config_aneg(phydev);
+}
+
+static int lantiq_gphy_ack_interrupt(struct phy_device *phydev)
+{
+ int reg;
+
+ /**
+ * Possible IRQ numbers:
+ * - IM3_IRL18 for GPHY0
+ * - IM3_IRL17 for GPHY1
+ *
+ * Due to a silicon bug IRQ lines are not really independent from
+ * each other. Sometimes the two lines are driven at the same time
+ * if only one GPHY core raises the interrupt.
+ */
+ reg = phy_read(phydev, MII_VR9_11G_ISTAT);
+
+ return (reg < 0) ? reg : 0;
+}
+
+static int lantiq_gphy_did_interrupt(struct phy_device *phydev)
+{
+ int reg;
+
+ reg = phy_read(phydev, MII_VR9_11G_ISTAT);
+
+ return reg > 0;
+}
+
+static int lantiq_gphy_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, MII_VR9_11G_IMASK, INT_VR9_11G_MASK);
+ else
+ err = phy_write(phydev, MII_VR9_11G_IMASK, 0);
+
+ return err;
+}
+
+static struct phy_driver lantiq_gphy[] = {
+ {
+ .phy_id = PHY_ID_PHY11G_1_3,
+ .phy_id_mask = 0xffffffff,
+ .name = "Lantiq XWAY PHY11G (PEF 7071/PEF 7072) v1.3",
+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
+ /* there is an errata regarding irqs in this rev */
+ .flags = 0,
+ .config_init = lantiq_gphy_config_init,
+ .config_aneg = lantiq_gphy14_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = lantiq_gphy_ack_interrupt,
+ .did_interrupt = lantiq_gphy_did_interrupt,
+ .config_intr = lantiq_gphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ }, {
+ .phy_id = PHY_ID_PHY22F_1_3,
+ .phy_id_mask = 0xffffffff,
+ .name = "Lantiq XWAY PHY22F (PEF 7061) v1.3",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ /* there is an errata regarding irqs in this rev */
+ .flags = 0,
+ .config_init = lantiq_gphy_config_init,
+ .config_aneg = lantiq_gphy14_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = lantiq_gphy_ack_interrupt,
+ .did_interrupt = lantiq_gphy_did_interrupt,
+ .config_intr = lantiq_gphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ }, {
+ .phy_id = PHY_ID_PHY11G_1_4,
+ .phy_id_mask = 0xffffffff,
+ .name = "Lantiq XWAY PHY11G (PEF 7071/PEF 7072) v1.4",
+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = lantiq_gphy_config_init,
+ .config_aneg = lantiq_gphy14_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = lantiq_gphy_ack_interrupt,
+ .did_interrupt = lantiq_gphy_did_interrupt,
+ .config_intr = lantiq_gphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ }, {
+ .phy_id = PHY_ID_PHY22F_1_4,
+ .phy_id_mask = 0xffffffff,
+ .name = "Lantiq XWAY PHY22F (PEF 7061) v1.4",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = lantiq_gphy_config_init,
+ .config_aneg = lantiq_gphy14_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = lantiq_gphy_ack_interrupt,
+ .did_interrupt = lantiq_gphy_did_interrupt,
+ .config_intr = lantiq_gphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ }, {
+ .phy_id = PHY_ID_PHY11G_1_5,
+ .phy_id_mask = 0xffffffff,
+ .name = "Lantiq XWAY PHY11G (PEF 7071/PEF 7072) v1.5 /
v1.6",
+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = lantiq_gphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = lantiq_gphy_ack_interrupt,
+ .did_interrupt = lantiq_gphy_did_interrupt,
+ .config_intr = lantiq_gphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ }, {
+ .phy_id = PHY_ID_PHY22F_1_5,
+ .phy_id_mask = 0xffffffff,
+ .name = "Lantiq XWAY PHY22F (PEF 7061) v1.5 / v1.6",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = lantiq_gphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = lantiq_gphy_ack_interrupt,
+ .did_interrupt = lantiq_gphy_did_interrupt,
+ .config_intr = lantiq_gphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ },
+};
+module_phy_driver(lantiq_gphy);
+
+static struct mdio_device_id __maybe_unused lantiq_gphy_tbl[] = {
+ { PHY_ID_PHY11G_1_3, 0xffffffff },
+ { PHY_ID_PHY22F_1_3, 0xffffffff },
+ { PHY_ID_PHY11G_1_4, 0xffffffff },
+ { PHY_ID_PHY22F_1_4, 0xffffffff },
+ { PHY_ID_PHY11G_1_5, 0xffffffff },
+ { PHY_ID_PHY22F_1_5, 0xffffffff },
+ { }
+};
+MODULE_DEVICE_TABLE(mdio, lantiq_gphy_tbl);
+
+MODULE_DESCRIPTION("Lantiq PHY driver");
+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierz...@googlemail.com>");
+MODULE_LICENSE("GPL");
smime.p7s
Description: S/MIME Cryptographic Signature
