From: Mitch Williams <mitch.a.willi...@intel.com>

Remove the need for a reset when the device enters limited promiscuous
mode. This was causing heartburn for people who were using VFs and
bridging, since this would require all of the VFs to undergo a reset
each time the PF changed its promiscuity.

Change-ID: I0a83495c5e4d68112bbc7a7a076d20fa8dd3b61c
Signed-off-by: Mitch Williams <mitch.a.willi...@intel.com>
Tested-by: Andrew Bowers <andrewx.bow...@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirs...@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 26 ++++++++++++++++++++++----
 1 file changed, 22 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c 
b/drivers/net/ethernet/intel/i40e/i40e_main.c
index a32be7c..d6a5106 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2110,7 +2110,25 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi)
                         */
                        if (pf->cur_promisc != cur_promisc) {
                                pf->cur_promisc = cur_promisc;
-                               set_bit(__I40E_PF_RESET_REQUESTED, &pf->state);
+                               if (cur_promisc)
+                                       aq_ret =
+                                             i40e_aq_set_default_vsi(hw,
+                                                                     vsi->seid,
+                                                                     NULL);
+                               else
+                                       aq_ret =
+                                           i40e_aq_clear_default_vsi(hw,
+                                                                     vsi->seid,
+                                                                     NULL);
+                               if (aq_ret) {
+                                       retval = i40e_aq_rc_to_posix(aq_ret,
+                                                       hw->aq.asq_last_status);
+                                       dev_info(&pf->pdev->dev,
+                                                "Set default VSI failed, err 
%s, aq_err %s\n",
+                                                i40e_stat_str(hw, aq_ret),
+                                                i40e_aq_str(hw,
+                                                    hw->aq.asq_last_status));
+                               }
                        }
                } else {
                        aq_ret = i40e_aq_set_vsi_unicast_promiscuous(
@@ -10047,14 +10065,14 @@ void i40e_veb_release(struct i40e_veb *veb)
 static int i40e_add_veb(struct i40e_veb *veb, struct i40e_vsi *vsi)
 {
        struct i40e_pf *pf = veb->pf;
-       bool is_default = veb->pf->cur_promisc;
        bool enable_stats = !!(pf->flags & I40E_FLAG_VEB_STATS_ENABLED);
        int ret;
 
-       /* get a VEB from the hardware */
        ret = i40e_aq_add_veb(&pf->hw, veb->uplink_seid, vsi->seid,
-                             veb->enabled_tc, is_default,
+                             veb->enabled_tc, false,
                              &veb->seid, enable_stats, NULL);
+
+       /* get a VEB from the hardware */
        if (ret) {
                dev_info(&pf->pdev->dev,
                         "couldn't add VEB, err %s aq_err %s\n",
-- 
2.5.5

Reply via email to