On Thu, Aug 25, 2016 at 06:44:57PM +0800, Sean Wang wrote:
> ommited the setting about pin-mux which results in incorrect signals
> being routed on GMAC2.
Hi Sean
Please could you explain this some more. I don't know too much about
pinctrl, but i've never seen a driver have to do anything with it. The
core driver code handles it all, selecting the default state. See
seeing this here makes me wonder if it is correct.
Thanks
Andrew
>
> Signed-off-by: Sean Wang <sean.w...@mediatek.com>
> ---
> drivers/net/ethernet/mediatek/mtk_eth_soc.c | 14 ++++++++++++++
> drivers/net/ethernet/mediatek/mtk_eth_soc.h | 3 +++
> 2 files changed, 17 insertions(+)
>
> diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> index 5bd31f8..0a4c782 100644
> --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> @@ -1415,6 +1415,7 @@ static int __init mtk_hw_init(struct mtk_eth *eth)
> usleep_range(10, 20);
> reset_control_deassert(eth->rstc);
> usleep_range(10, 20);
> + pinctrl_select_state(eth->pins, eth->ephy_default);
>
> /* Set GE2 driving and slew rate */
> regmap_write(eth->pctl, GPIO_DRV_SEL10, 0xa00);
> @@ -1858,6 +1859,19 @@ static int mtk_probe(struct platform_device *pdev)
> return -ENODEV;
> }
>
> + eth->pins = devm_pinctrl_get(&pdev->dev);
> + if (IS_ERR(eth->pins)) {
> + dev_err(&pdev->dev, "cannot get pinctrl\n");
> + return PTR_ERR(eth->pins);
> + }
> +
> + eth->ephy_default =
> + pinctrl_lookup_state(eth->pins, "default");
> + if (IS_ERR(eth->ephy_default)) {
> + dev_err(&pdev->dev, "cannot get pinctrl state\n");
> + return PTR_ERR(eth->ephy_default);
> + }
> +
> clk_prepare_enable(eth->clk_ethif);
> clk_prepare_enable(eth->clk_esw);
> clk_prepare_enable(eth->clk_gp1);
> diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
> b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
> index f82e3ac..13d3f1b 100644
> --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
> +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
> @@ -404,6 +404,9 @@ struct mtk_eth {
> struct clk *clk_esw;
> struct clk *clk_gp1;
> struct clk *clk_gp2;
> + struct pinctrl *pins;
> + struct pinctrl_state *ephy_default;
> +
> struct mii_bus *mii_bus;
> struct work_struct pending_work;
> };
> --
> 1.9.1
>
