Please ignore this one.
On Thu, Sep 22, 2016 at 8:33 AM, Joel Stanley <j...@jms.id.au> wrote:
> Hello Dave,
>
> This series adds support to the ftgmac100 driver for the Aspeed ast2400 and
> ast2500 SoCs. In particular, they ensure the driver works correctly on the
> ast2500 where the MAC block has seen some changes in register layout.
>
> They have been tested on ast2400 and ast2500 systems with the NCSI stack and
> with a directly attached PHY.
>
> Cheers,
>
> Joel
>
> Andrew Jeffery (2):
> net/ftgmac100: Separate rx page storage from rxdesc
> net/ftgmac100: Make EDO{R,T}R bits configurable
>
> Gavin Shan (2):
> net/faraday: Avoid PHYSTS_CHG interrupt
> net/faraday: Clear stale interrupts
>
> Joel Stanley (3):
> net/ftgmac100: Adapt for Aspeed SoCs
> net/faraday: Fix phy link irq on Aspeed G5 SoCs
> net/faraday: Configure old MDIO interface on Aspeed SoCs
>
> drivers/net/ethernet/faraday/ftgmac100.c | 92
> ++++++++++++++++++++++++--------
> drivers/net/ethernet/faraday/ftgmac100.h | 8 ++-
> 2 files changed, 77 insertions(+), 23 deletions(-)
>
> --
> 2.9.3
>
