Statements should start on tabstops.
Use a single statement and test instead of multiple tests.
Signed-off-by: Joe Perches <j...@perches.com>
---
drivers/net/ethernet/intel/igb/e1000_mac.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.c
b/drivers/net/ethernet/intel/igb/e1000_mac.c
index 5010e2232c50..5eff82678f0b 100644
--- a/drivers/net/ethernet/intel/igb/e1000_mac.c
+++ b/drivers/net/ethernet/intel/igb/e1000_mac.c
@@ -792,15 +792,13 @@ static s32 igb_set_default_fc(struct e1000_hw *hw)
* control setting, then the variable hw->fc will
* be initialized based on a value in the EEPROM.
*/
- if (hw->mac.type == e1000_i350) {
+ if (hw->mac.type == e1000_i350)
lan_offset = NVM_82580_LAN_FUNC_OFFSET(hw->bus.func);
- ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG
- + lan_offset, 1, &nvm_data);
- } else {
- ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG,
- 1, &nvm_data);
- }
+ else
+ lan_offset = 0;
+ ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG + lan_offset,
+ 1, &nvm_data);
if (ret_val) {
hw_dbg("NVM Read Error\n");
goto out;
@@ -808,8 +806,7 @@ static s32 igb_set_default_fc(struct e1000_hw *hw)
if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0)
hw->fc.requested_mode = e1000_fc_none;
- else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) ==
- NVM_WORD0F_ASM_DIR)
+ else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == NVM_WORD0F_ASM_DIR)
hw->fc.requested_mode = e1000_fc_tx_pause;
else
hw->fc.requested_mode = e1000_fc_full;
--
2.10.0.rc2.1.g053435c
