From: Georgi Vlaev <gvl...@juniper.net>
Add DT bindings document for the PTXPMB extended CPLD device.
Signed-off-by: Georgi Vlaev <gvl...@juniper.net>
[Ported from Juniper kernel]
Signed-off-by: Pantelis Antoniou <pantelis.anton...@konsulko.com>
---
.../bindings/mfd/jnx-ptxpmb-ext-cpld.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644
Documentation/devicetree/bindings/mfd/jnx-ptxpmb-ext-cpld.txt
diff --git a/Documentation/devicetree/bindings/mfd/jnx-ptxpmb-ext-cpld.txt
b/Documentation/devicetree/bindings/mfd/jnx-ptxpmb-ext-cpld.txt
new file mode 100644
index 0000000..098a548a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/jnx-ptxpmb-ext-cpld.txt
@@ -0,0 +1,35 @@
+* Device tree bindings for Juniper's PTXPMB Extended CPLD FPGA MFD driver
+
+The device supports a gpio block which is described in the
+jnx-gpio-ptxpmb-ext-cpld document.
+
+Required properties:
+
+- compatible: "jnx,ptxpmb-ext-cpld"
+
+- reg: contains offset/length value for device state control
+ registers space.
+
+Optional properties:
+
+- interrupts: The interrupt line(s) the /IRQ signal(s) for the device
is
+ connected to.
+
+- interrupt-parent: The parent interrupt controller.
+
+Example:
+
+ext-cpld@1,0 {
+ compatible = "jnx,ptxpmb-ext-cpld";
+ reg = <0x1 0 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <7 2>, <8 2>;
+
+ gpio_ext_cpld: cpld-ext-gpio {
+ compatible = "jnx,gpio-ptxpmb-ext-cpld";
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+};
--
1.9.1
