From: Yotam Gigi <yotam...@gmail.com>

The MPSC register allows to configure ingress packet sampling on specific
port of the mlxsw device. The sampled packets are then trapped via
PKT_SAMPLE trap.

Signed-off-by: Yotam Gigi <yot...@mellanox.com>
Signed-off-by: Jiri Pirko <j...@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 43 +++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h 
b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 6460c72..e657865 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -4832,6 +4832,47 @@ static inline void mlxsw_reg_mlcr_pack(char *payload, u8 
local_port,
                                           MLXSW_REG_MLCR_DURATION_MAX : 0);
 }
 
+/* MPSC - Monitoring Packet Sampling Configuration Register
+ * --------------------------------------------------------
+ * MPSC Register is used to configure the Packet Sampling mechanism.
+ */
+#define MLXSW_REG_MPSC_ID 0x9080
+#define MLXSW_REG_MPSC_LEN 0x14
+
+static const struct mlxsw_reg_info mlxsw_reg_mpsc = {
+       .id = MLXSW_REG_MPSC_ID,
+       .len = MLXSW_REG_MPSC_LEN,
+};
+
+/* reg_mpsc_local_port
+ * Local port number
+ * Not supported for CPU port
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, mpsc, local_port, 0x00, 16, 8);
+
+/* reg_mpsc_e
+ * Enable sampling on port local_port
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mpsc, e, 0x04, 30, 1);
+
+/* reg_mpsc_rate
+ * Sampling rate = 1 out of rate packets (with randomization around
+ * the point). Valid values are: 1 to 3.5*10^9
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mpsc, rate, 0x08, 0, 32);
+
+static inline void mlxsw_reg_mpsc_pack(char *payload, u8 local_port, bool e,
+                                      u32 rate)
+{
+       MLXSW_REG_ZERO(mpsc, payload);
+       mlxsw_reg_mpsc_local_port_set(payload, local_port);
+       mlxsw_reg_mpsc_e_set(payload, e);
+       mlxsw_reg_mpsc_rate_set(payload, rate);
+}
+
 /* SBPR - Shared Buffer Pools Register
  * -----------------------------------
  * The SBPR configures and retrieves the shared buffer pools and configuration.
@@ -5367,6 +5408,8 @@ static inline const char *mlxsw_reg_id_str(u16 reg_id)
                return "MTMP";
        case MLXSW_REG_MLCR_ID:
                return "MLCR";
+       case MLXSW_REG_MPSC_ID:
+               return "MPSC";
        case MLXSW_REG_SBPR_ID:
                return "SBPR";
        case MLXSW_REG_SBCM_ID:
-- 
2.5.5

Reply via email to