From: "Allan W. Nielsen" <allan.niel...@microsemi.com> Date: Thu, 13 Oct 2016 20:21:30 +0200
> Edge-Rate cleanup include the following: > - Updated device tree bindings documentation for edge-rate > - The edge-rate is now specified as a "slowdown", meaning that it is now > being specified as positive values instead of negative (both > documentation and implementation wise). > - Only explicitly documented values for "vsc8531,vddmac" and > "vsc8531,edge-slowdown" are accepted by the device driver. > - Deleted include/dt-bindings/net/mscc-phy-vsc8531.h as it was not needed. > - Read/validate devicetree settings in probe instead of init > > Signed-off-by: Allan W. Nielsen <allan.niel...@microsemi.com> > Signed-off-by: Raju Lakkaraju <raju.lakkar...@microsemi.com> This patch does not apply to the net-next tree. Take my tree, put this email of your's into a file, and run this: bash$ git am file and you will get: [davem@dhcp-10-15-49-210 net-next]$ git am --signoff net-next-v11-1-1-net-phy-Cleanup-the-Edge-Rate-feature-in-Microsemi-PHYs..patch Applying: net: phy: Cleanup the Edge-Rate feature in Microsemi PHYs. error: patch failed: Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt:6 error: Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt: patch does not apply error: patch failed: drivers/net/phy/mscc.c:12 error: drivers/net/phy/mscc.c: patch does not apply error: include/dt-bindings/net/mscc-phy-vsc8531.h: does not exist in index Patch failed at 0001 net: phy: Cleanup the Edge-Rate feature in Microsemi PHYs. The copy of the patch that failed is found in: /home/davem/src/GIT/net-next/.git/rebase-apply/patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". Please do not resubmit this patch until you can successfully email the patch to yourself and apply it cleanly to the net-next tree.
