On Tue, Oct 18, 2016 at 04:45:51PM +0300, Denis Kirjanov wrote:
> On 10/17/16, Jarod Wilson <ja...@redhat.com> wrote:
> > dl2k: min_mtu 68, max_mtu 1536 or 8000, depending on hardware
> > - Removed change_mtu, does nothing productive anymore
> >
> > sundance: min_mtu 68, max_mtu 8191
> >
> > CC: netdev@vger.kernel.org
> > CC: Denis Kirjanov <k...@linux-powerpc.org>
> > Signed-off-by: Jarod Wilson <ja...@redhat.com>
> > ---
> > drivers/net/ethernet/dlink/dl2k.c | 22 ++++------------------
> > drivers/net/ethernet/dlink/sundance.c | 6 ++++--
> > 2 files changed, 8 insertions(+), 20 deletions(-)
...
> > diff --git a/drivers/net/ethernet/dlink/sundance.c
> > b/drivers/net/ethernet/dlink/sundance.c
> > index 79d8009..eab36ac 100644
> > --- a/drivers/net/ethernet/dlink/sundance.c
> > +++ b/drivers/net/ethernet/dlink/sundance.c
> > @@ -580,6 +580,10 @@ static int sundance_probe1(struct pci_dev *pdev,
> > dev->ethtool_ops = ðtool_ops;
> > dev->watchdog_timeo = TX_TIMEOUT;
> >
> > + /* MTU range: 68 - 8191 */
> > + dev->min_mtu = ETH_MIN_MTU;
> > + dev->max_mtu = 8191;
> > +
> ICPlus datasheet defines the max frame size like 0x1514 or 0x4491
> based on the RcvLargeFrames bit in the MACCtrl0 register
I do anticipate this patchset might bring to light some inaccuracies in
min/max mtu values currently implemented in various drivers, but for the
moment, I'm going for 100% identical behavior with what's currently in the
driver, and if you'll look down below...
> > pci_set_drvdata(pdev, dev);
> >
> > i = register_netdev(dev);
> > @@ -713,8 +717,6 @@ static int sundance_probe1(struct pci_dev *pdev,
> >
> > static int change_mtu(struct net_device *dev, int new_mtu)
> > {
> > - if ((new_mtu < 68) || (new_mtu > 8191)) /* Set by RxDMAFrameLen */
^^^^
The 8191 was simply transplanted from right here. I think altering the
value should be the subject of a separate patch.
--
Jarod Wilson
ja...@redhat.com
