This reverts commit 98267311fe3b334ae7c107fa0e2413adcf3ba735.
Suspending the SGMII alongside the copper side
made the at803x inaccessable while powered down,
e.g. it can't be re-probed after suspend.
Signed-off-by: Zefir Kurtisi <zefir.kurt...@neratec.com>
---
drivers/net/phy/at803x.c | 26 --------------------------
1 file changed, 26 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index f279a89..cf74d10 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -52,9 +52,6 @@
#define AT803X_DEBUG_REG_5 0x05
#define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8)
-#define AT803X_REG_CHIP_CONFIG 0x1f
-#define AT803X_BT_BX_REG_SEL 0x8000
-
#define ATH8030_PHY_ID 0x004dd076
#define ATH8031_PHY_ID 0x004dd074
#define ATH8035_PHY_ID 0x004dd072
@@ -209,7 +206,6 @@ static int at803x_suspend(struct phy_device *phydev)
{
int value;
int wol_enabled;
- int ccr;
mutex_lock(&phydev->lock);
@@ -225,16 +221,6 @@ static int at803x_suspend(struct phy_device *phydev)
phy_write(phydev, MII_BMCR, value);
- if (phydev->interface != PHY_INTERFACE_MODE_SGMII)
- goto done;
-
- /* also power-down SGMII interface */
- ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
- phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL);
- phy_write(phydev, MII_BMCR, phy_read(phydev, MII_BMCR) | BMCR_PDOWN);
- phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
-
-done:
mutex_unlock(&phydev->lock);
return 0;
@@ -243,7 +229,6 @@ static int at803x_suspend(struct phy_device *phydev)
static int at803x_resume(struct phy_device *phydev)
{
int value;
- int ccr;
mutex_lock(&phydev->lock);
@@ -251,17 +236,6 @@ static int at803x_resume(struct phy_device *phydev)
value &= ~(BMCR_PDOWN | BMCR_ISOLATE);
phy_write(phydev, MII_BMCR, value);
- if (phydev->interface != PHY_INTERFACE_MODE_SGMII)
- goto done;
-
- /* also power-up SGMII interface */
- ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
- phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL);
- value = phy_read(phydev, MII_BMCR) & ~(BMCR_PDOWN | BMCR_ISOLATE);
- phy_write(phydev, MII_BMCR, value);
- phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
-
-done:
mutex_unlock(&phydev->lock);
return 0;
--
2.7.4
