On 11/04/2016 05:23 PM, Florian Fainelli wrote:
>
>
> On 11/04/2016 08:05 AM, Sebastian Frias wrote:
>> Commit a999589ccaae ("phylib: add RGMII-ID interface mode definition")
>> and commit 7d400a4c5897 ("phylib: add PHY interface modes for internal
>> delay for tx and rx only") added several RGMII declinations:
>> PHY_INTERFACE_MODE_RGMII_ID, PHY_INTERFACE_MODE_RGMII_RXID and
>> PHY_INTERFACE_MODE_RGMII_TXID to deal with internal delays.
>>
>> Those are all RGMII modes (1Gbit) and must be considered that way when
>> setting the MAC Mode or the Pads Mode for the HW to work properly.
>>
>> Signed-off-by: Sebastian Frias <s...@laposte.net>
>> ---
>> drivers/net/ethernet/aurora/nb8800.c | 10 ++++++----
>> 1 file changed, 6 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/aurora/nb8800.c
>> b/drivers/net/ethernet/aurora/nb8800.c
>> index d2855c9..6230ace 100644
>> --- a/drivers/net/ethernet/aurora/nb8800.c
>> +++ b/drivers/net/ethernet/aurora/nb8800.c
>> @@ -609,7 +609,10 @@ static void nb8800_mac_config(struct net_device *dev)
>> mac_mode |= HALF_DUPLEX;
>>
>> if (gigabit) {
>> - if (priv->phy_mode == PHY_INTERFACE_MODE_RGMII)
>> + if (priv->phy_mode == PHY_INTERFACE_MODE_RGMII ||
>> + priv->phy_mode == PHY_INTERFACE_MODE_RGMII_ID ||
>> + priv->phy_mode == PHY_INTERFACE_MODE_RGMII_RXID ||
>> + priv->phy_mode == PHY_INTERFACE_MODE_RGMII_TXID)
>
> phy_interface_is_rgmii(phydev)?
Thanks! I'll post an update.
>
>> mac_mode |= RGMII_MODE;
>>
>> mac_mode |= GMAC_MODE;
>> @@ -1278,9 +1281,8 @@ static int nb8800_tangox_init(struct net_device *dev)
>> break;
>>
>> case PHY_INTERFACE_MODE_RGMII:
>> - pad_mode = PAD_MODE_RGMII;
>> - break;
>> -
>> + case PHY_INTERFACE_MODE_RGMII_ID:
>> + case PHY_INTERFACE_MODE_RGMII_RXID:
>> case PHY_INTERFACE_MODE_RGMII_TXID:
>> pad_mode = PAD_MODE_RGMII;
>> break;
>>
>
