The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <trem...@gmail.com>
---
drivers/net/ethernet/broadcom/bnx2.c | 74 +++++++++++++++++++---------------
1 files changed, 41 insertions(+), 33 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2.c
b/drivers/net/ethernet/broadcom/bnx2.c
index eab49ff..09d5b61 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -6882,12 +6882,14 @@ static u32 bnx2_find_max_ring(u32 ring_size, u32
max_size)
/* All ethtool functions called with rtnl_lock */
static int
-bnx2_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+bnx2_get_link_ksettings(struct net_device *dev,
+ struct ethtool_link_ksettings *cmd)
{
struct bnx2 *bp = netdev_priv(dev);
int support_serdes = 0, support_copper = 0;
+ u32 supported, advertising;
- cmd->supported = SUPPORTED_Autoneg;
+ supported = SUPPORTED_Autoneg;
if (bp->phy_flags & BNX2_PHY_FLAG_REMOTE_PHY_CAP) {
support_serdes = 1;
support_copper = 1;
@@ -6897,56 +6899,59 @@ static u32 bnx2_find_max_ring(u32 ring_size, u32
max_size)
support_copper = 1;
if (support_serdes) {
- cmd->supported |= SUPPORTED_1000baseT_Full |
+ supported |= SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE;
if (bp->phy_flags & BNX2_PHY_FLAG_2_5G_CAPABLE)
- cmd->supported |= SUPPORTED_2500baseX_Full;
-
+ supported |= SUPPORTED_2500baseX_Full;
}
if (support_copper) {
- cmd->supported |= SUPPORTED_10baseT_Half |
+ supported |= SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_TP;
-
}
spin_lock_bh(&bp->phy_lock);
- cmd->port = bp->phy_port;
- cmd->advertising = bp->advertising;
+ cmd->base.port = bp->phy_port;
+ advertising = bp->advertising;
if (bp->autoneg & AUTONEG_SPEED) {
- cmd->autoneg = AUTONEG_ENABLE;
+ cmd->base.autoneg = AUTONEG_ENABLE;
} else {
- cmd->autoneg = AUTONEG_DISABLE;
+ cmd->base.autoneg = AUTONEG_DISABLE;
}
if (netif_carrier_ok(dev)) {
- ethtool_cmd_speed_set(cmd, bp->line_speed);
- cmd->duplex = bp->duplex;
+ cmd->base.speed = bp->line_speed;
+ cmd->base.duplex = bp->duplex;
if (!(bp->phy_flags & BNX2_PHY_FLAG_SERDES)) {
if (bp->phy_flags & BNX2_PHY_FLAG_MDIX)
- cmd->eth_tp_mdix = ETH_TP_MDI_X;
+ cmd->base.eth_tp_mdix = ETH_TP_MDI_X;
else
- cmd->eth_tp_mdix = ETH_TP_MDI;
+ cmd->base.eth_tp_mdix = ETH_TP_MDI;
}
}
else {
- ethtool_cmd_speed_set(cmd, SPEED_UNKNOWN);
- cmd->duplex = DUPLEX_UNKNOWN;
+ cmd->base.speed = SPEED_UNKNOWN;
+ cmd->base.duplex = DUPLEX_UNKNOWN;
}
spin_unlock_bh(&bp->phy_lock);
- cmd->transceiver = XCVR_INTERNAL;
- cmd->phy_address = bp->phy_addr;
+ cmd->base.phy_address = bp->phy_addr;
+
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);
return 0;
}
static int
-bnx2_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+bnx2_set_link_ksettings(struct net_device *dev,
+ const struct ethtool_link_ksettings *cmd)
{
struct bnx2 *bp = netdev_priv(dev);
u8 autoneg = bp->autoneg;
@@ -6957,24 +6962,26 @@ static u32 bnx2_find_max_ring(u32 ring_size, u32
max_size)
spin_lock_bh(&bp->phy_lock);
- if (cmd->port != PORT_TP && cmd->port != PORT_FIBRE)
+ if (cmd->base.port != PORT_TP && cmd->base.port != PORT_FIBRE)
goto err_out_unlock;
- if (cmd->port != bp->phy_port &&
+ if (cmd->base.port != bp->phy_port &&
!(bp->phy_flags & BNX2_PHY_FLAG_REMOTE_PHY_CAP))
goto err_out_unlock;
/* If device is down, we can store the settings only if the user
* is setting the currently active port.
*/
- if (!netif_running(dev) && cmd->port != bp->phy_port)
+ if (!netif_running(dev) && cmd->base.port != bp->phy_port)
goto err_out_unlock;
- if (cmd->autoneg == AUTONEG_ENABLE) {
+ if (cmd->base.autoneg == AUTONEG_ENABLE) {
autoneg |= AUTONEG_SPEED;
- advertising = cmd->advertising;
- if (cmd->port == PORT_TP) {
+ ethtool_convert_link_mode_to_legacy_u32(
+ &advertising, cmd->link_modes.advertising);
+
+ if (cmd->base.port == PORT_TP) {
advertising &= ETHTOOL_ALL_COPPER_SPEED;
if (!advertising)
advertising = ETHTOOL_ALL_COPPER_SPEED;
@@ -6986,11 +6993,12 @@ static u32 bnx2_find_max_ring(u32 ring_size, u32
max_size)
advertising |= ADVERTISED_Autoneg;
}
else {
- u32 speed = ethtool_cmd_speed(cmd);
- if (cmd->port == PORT_FIBRE) {
+ u32 speed = cmd->base.speed;
+
+ if (cmd->base.port == PORT_FIBRE) {
if ((speed != SPEED_1000 &&
speed != SPEED_2500) ||
- (cmd->duplex != DUPLEX_FULL))
+ (cmd->base.duplex != DUPLEX_FULL))
goto err_out_unlock;
if (speed == SPEED_2500 &&
@@ -7001,7 +7009,7 @@ static u32 bnx2_find_max_ring(u32 ring_size, u32 max_size)
autoneg &= ~AUTONEG_SPEED;
req_line_speed = speed;
- req_duplex = cmd->duplex;
+ req_duplex = cmd->base.duplex;
advertising = 0;
}
@@ -7015,7 +7023,7 @@ static u32 bnx2_find_max_ring(u32 ring_size, u32 max_size)
* brought up.
*/
if (netif_running(dev))
- err = bnx2_setup_phy(bp, cmd->port);
+ err = bnx2_setup_phy(bp, cmd->base.port);
err_out_unlock:
spin_unlock_bh(&bp->phy_lock);
@@ -7800,8 +7808,6 @@ static int bnx2_set_channels(struct net_device *dev,
}
static const struct ethtool_ops bnx2_ethtool_ops = {
- .get_settings = bnx2_get_settings,
- .set_settings = bnx2_set_settings,
.get_drvinfo = bnx2_get_drvinfo,
.get_regs_len = bnx2_get_regs_len,
.get_regs = bnx2_get_regs,
@@ -7825,6 +7831,8 @@ static int bnx2_set_channels(struct net_device *dev,
.get_sset_count = bnx2_get_sset_count,
.get_channels = bnx2_get_channels,
.set_channels = bnx2_set_channels,
+ .get_link_ksettings = bnx2_get_link_ksettings,
+ .set_link_ksettings = bnx2_set_link_ksettings,
};
/* Called with rtnl_lock */
--
1.7.4.4
