Re: Synopsys Ethernet QoS Driver

[Giuseppe CAVALLARO]

On 11/23/2016 12:43 PM, Joao Pinto wrote:

> Rabin Vincent can review and test that the port works properly on our 
Artpec-chips that use dwc_eth_qos.c today.
>
> The main porting step is to implement the device tree binding in 
bindings/net/snps,dwc-qos-ethernet.txt. Also our chip has a strict requirement 
that the phy is enabled when the SWR reset bit is set (it needs a tx clock to 
complete the reset).
>
> - Lars

Ok, I will do the task.

@Peppe: Agree with the plan?

Agree

peppe