Hi Andrew,
Andrew Lunn <and...@lunn.ch> writes:
>> diff --git a/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
>> b/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
>> index ab52c37..9e51405 100644
>> --- a/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
>> +++ b/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
>> @@ -765,6 +765,9 @@ struct mv88e6xxx_ops {
>> int (*phy_write)(struct mv88e6xxx_chip *chip, int addr, int reg,
>> u16 val);
>>
>> + /* Switch Software Reset */
>> + int (*reset)(struct mv88e6xxx_chip *chip);
>> +
>
> Hi Vivien
>
> In my huge patch series of 6390, i've been using a g1_ prefix for
> functionality which is in global 1, g2_ for global 2, etc. This has
> worked for everything so far with the exception of setting which
> reserved MAC addresses should be sent to the CPU. Most devices have it
> in g2, but 6390 has it in g1.
>
> Please could you add the prefix.
I don't understand. It looks like you are talking about the second part
of the comment I made on your RFC patchset, about the Rsvd2CPU feature:
https://www.mail-archive.com/netdev@vger.kernel.org/msg139837.html
Switch reset routines are implemented in this patch in global1.c as
mv88e6185_g1_reset and mv88e6352_g1_reset.
6185 and 6352 are implementation references for other switches.
Thanks,
Vivien
