Ethtool was reporting that loopback failed randomly on esb2
systems. Upon study it was found that the phy manual was changed
with respect to the loopback mode bits. The new value fixes it.
Signed-off-by: Jesse Brandeburg <[EMAIL PROTECTED]>
Signed-off-by: Auke Kok <[EMAIL PROTECTED]>
---
drivers/net/e1000/e1000_ethtool.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/e1000/e1000_ethtool.c
b/drivers/net/e1000/e1000_ethtool.c
index 6ed7f59..845d293 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -1246,7 +1246,7 @@ e1000_integrated_phy_loopback(struct e10
} else if (adapter->hw.phy_type == e1000_phy_gg82563) {
e1000_write_phy_reg(&adapter->hw,
GG82563_PHY_KMRN_MODE_CTRL,
- 0x1CE);
+ 0x1CC);
}
/* force 1000, set loopback */
e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x4140);
--
Auke Kok <[EMAIL PROTECTED]>
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
