From: Volodymyr Bendiuga <volodymyr.bendi...@westermo.se>
Some devices, such as the mv88e6097 do have ADDR[0] external and so it
is possible to configure the device to use SMI address 0x1. Remove the
restriction, as there are boards using this address.
Signed-off-by: Volodymyr Bendiuga <volodymyr.bendi...@westermo.se>
Reviewed-by: Andrew Lunn <and...@lunn.ch>
---
drivers/net/dsa/mv88e6xxx/chip.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 4da379f..173ea97 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -4234,10 +4234,6 @@ static void mv88e6xxx_phy_destroy(struct mv88e6xxx_chip
*chip)
static int mv88e6xxx_smi_init(struct mv88e6xxx_chip *chip,
struct mii_bus *bus, int sw_addr)
{
- /* ADDR[0] pin is unavailable externally and considered zero */
- if (sw_addr & 0x1)
- return -EINVAL;
-
if (sw_addr == 0)
chip->smi_ops = &mv88e6xxx_smi_single_chip_ops;
else if (mv88e6xxx_has(chip, MV88E6XXX_FLAGS_MULTI_CHIP))
--
2.7.4
