Use eth_zero_addr to assign zero address to the given address array
instead of memset when the second argument in memset is address
of zero. Also, it makes the code clearer
Signed-off-by: Shyam Saini <mayhs11sa...@gmail.com>
---
drivers/net/ethernet/qlogic/qed/qed_l2.c | 2 +-
drivers/net/ethernet/qlogic/qed/qed_sriov.c | 7 +++----
2 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c
b/drivers/net/ethernet/qlogic/qed/qed_l2.c
index c92a850..7520eb3 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_l2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c
@@ -1846,7 +1846,7 @@ static int qed_fill_eth_dev_info(struct qed_dev *cdev,
qed_fill_dev_info(cdev, &info->common);
if (IS_VF(cdev))
- memset(info->common.hw_mac, 0, ETH_ALEN);
+ eth_zero_addr(info->common.hw_mac);
return 0;
}
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
index b121364..3f4bf31 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -1224,7 +1224,7 @@ static void qed_iov_clean_vf(struct qed_hwfn *p_hwfn, u8
vfid)
return;
/* Clear the VF mac */
- memset(vf_info->mac, 0, ETH_ALEN);
+ eth_zero_addr(vf_info->mac);
vf_info->rx_accept_mode = 0;
vf_info->tx_accept_mode = 0;
@@ -2626,8 +2626,7 @@ static int qed_iov_vf_update_mac_shadow(struct qed_hwfn
*p_hwfn,
for (i = 0; i < QED_ETH_VF_NUM_MAC_FILTERS; i++) {
if (ether_addr_equal(p_vf->shadow_config.macs[i],
p_params->mac)) {
- memset(p_vf->shadow_config.macs[i], 0,
- ETH_ALEN);
+ eth_zero_addr(p_vf->shadow_config.macs[i]);
break;
}
}
@@ -2640,7 +2639,7 @@ static int qed_iov_vf_update_mac_shadow(struct qed_hwfn
*p_hwfn,
} else if (p_params->opcode == QED_FILTER_REPLACE ||
p_params->opcode == QED_FILTER_FLUSH) {
for (i = 0; i < QED_ETH_VF_NUM_MAC_FILTERS; i++)
- memset(p_vf->shadow_config.macs[i], 0, ETH_ALEN);
+ eth_zero_addr(p_vf->shadow_config.macs[i]);
}
/* List the new MAC address */
--
2.7.4
