This patch adds more info to stmicro' Kconfig files in order to be clearer that the driver can be used by ethernet cards based on 10/100/1000/EQOS Synopsys IP Cores.
EQOS was also added stmmac/Kconfig Kconfig, since dwmac4 is in fact EQoS, one of Synopsys Ethernet IPs. More info at: https://www.synopsys.com/dw/ipdir.php?ds=dwc_ether_qos Signed-off-by: Joao Pinto <jpi...@synopsys.com> --- drivers/net/ethernet/stmicro/Kconfig | 3 ++- drivers/net/ethernet/stmicro/stmmac/Kconfig | 15 +++++++-------- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/stmicro/Kconfig b/drivers/net/ethernet/stmicro/Kconfig index 1c1157d..ecd7a5e 100644 --- a/drivers/net/ethernet/stmicro/Kconfig +++ b/drivers/net/ethernet/stmicro/Kconfig @@ -7,7 +7,8 @@ config NET_VENDOR_STMICRO default y depends on HAS_IOMEM ---help--- - If you have a network (Ethernet) card belonging to this class, say Y. + If you have a network (Ethernet) card based on Synopsys Ethernet IP + Cores, say Y. Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index 99594e3..cfbe363 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -1,5 +1,5 @@ config STMMAC_ETH - tristate "STMicroelectronics 10/100/1000 Ethernet driver" + tristate "STMicroelectronics 10/100/1000/EQOS Ethernet driver" depends on HAS_IOMEM && HAS_DMA select MII select PHYLIB @@ -7,9 +7,8 @@ config STMMAC_ETH imply PTP_1588_CLOCK select RESET_CONTROLLER ---help--- - This is the driver for the Ethernet IPs are built around a - Synopsys IP Core and only tested on the STMicroelectronics - platforms. + This is the driver for the Ethernet IPs built around a + Synopsys IP Core. if STMMAC_ETH @@ -152,11 +151,11 @@ config STMMAC_PCI tristate "STMMAC PCI bus support" depends on STMMAC_ETH && PCI ---help--- - This is to select the Synopsys DWMAC available on PCI devices, - if you have a controller with this interface, say Y or M here. + This selects the platform specific bus support for the stmmac driver. + This driver was tested on XLINX XC2V3000 FF1152AMT0221 + D1215994A VIRTEX FPGA board and SNPS QoS IPK Prototyping Kit. - This PCI support is tested on XLINX XC2V3000 FF1152AMT0221 - D1215994A VIRTEX FPGA board. + If you have a controller with this interface, say Y or M here. If unsure, say N. endif -- 2.9.3
