From: Jiri Pirko <j...@mellanox.com>
The PACL register is used for configuration of the ACL.
Signed-off-by: Jiri Pirko <j...@mellanox.com>
Reviewed-by: Ido Schimmel <ido...@mellanox.com>
---
drivers/net/ethernet/mellanox/mlxsw/reg.h | 47 +++++++++++++++++++++++++++++--
1 file changed, 45 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h
b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 9fb0316..18b2da4 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -1,9 +1,9 @@
/*
* drivers/net/ethernet/mellanox/mlxsw/reg.h
- * Copyright (c) 2015 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2015-2017 Mellanox Technologies. All rights reserved.
* Copyright (c) 2015-2016 Ido Schimmel <ido...@mellanox.com>
* Copyright (c) 2015 Elad Raz <el...@mellanox.com>
- * Copyright (c) 2015-2016 Jiri Pirko <j...@mellanox.com>
+ * Copyright (c) 2015-2017 Jiri Pirko <j...@mellanox.com>
* Copyright (c) 2016 Yotam Gigi <yot...@mellanox.com>
*
* Redistribution and use in source and binary forms, with or without
@@ -1757,6 +1757,48 @@ static inline void mlxsw_reg_spvmlr_pack(char *payload,
u8 local_port,
}
}
+/* PACL - Policy-Engine ACL Register
+ * ---------------------------------
+ * This register is used for configuration of the ACL.
+ */
+#define MLXSW_REG_PACL_ID 0x3004
+#define MLXSW_REG_PACL_LEN 0x70
+
+MLXSW_REG_DEFINE(pacl, MLXSW_REG_PACL_ID, MLXSW_REG_PACL_LEN);
+
+/* reg_pacl_v
+ * Valid. Setting the v bit makes the ACL valid. It should not be cleared
+ * while the ACL is bounded to either a port, VLAN or ACL rule.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, pacl, v, 0x00, 24, 1);
+
+/* reg_pacl_acl_id
+ * An identifier representing the ACL (managed by software)
+ * Range 0 .. cap_max_acl_regions - 1
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pacl, acl_id, 0x08, 0, 16);
+
+#define MLXSW_REG_PXXX_TCAM_REGION_INFO_LEN 16
+
+/* reg_pacl_tcam_region_info
+ * Opaque object that represents a TCAM region.
+ * Obtained through PTAR register.
+ * Access: RW
+ */
+MLXSW_ITEM_BUF(reg, pacl, tcam_region_info, 0x30,
+ MLXSW_REG_PXXX_TCAM_REGION_INFO_LEN);
+
+static inline void mlxsw_reg_pacl_pack(char *payload, u16 acl_id,
+ bool valid, const char *tcam_region_info)
+{
+ MLXSW_REG_ZERO(pacl, payload);
+ mlxsw_reg_pacl_acl_id_set(payload, acl_id);
+ mlxsw_reg_pacl_v_set(payload, valid);
+ mlxsw_reg_pacl_tcam_region_info_memcpy_to(payload, tcam_region_info);
+}
+
/* QPCR - QoS Policer Configuration Register
* -----------------------------------------
* The QPCR register is used to create policers - that limit
@@ -5434,6 +5476,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = {
MLXSW_REG(svpe),
MLXSW_REG(sfmr),
MLXSW_REG(spvmlr),
+ MLXSW_REG(pacl),
MLXSW_REG(qpcr),
MLXSW_REG(qtct),
MLXSW_REG(qeec),
--
2.7.4
