From: Florian Vallee <fval...@eukrea.fr>
According to the m_can user manual changelog the BTP register layout was
updated with core revision 3.1.0
This change is not backward-compatible and using the current driver along
with a recent IP results in an incorrect bitrate on the wire.
Tested with a SAMA5D2 SoC (CREL = 0x31040730)
Signed-off-by: Florian Vallee <fval...@eukrea.fr>
Tested-by: Quentin Schulz <quentin.sch...@free-electrons.com>
---
drivers/net/can/m_can/m_can.c | 38 +++++++++++++++++++++++++++++++++++---
1 file changed, 35 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 195f15e..246584e 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -105,6 +105,10 @@ enum m_can_mram_cfg {
MRAM_CFG_NUM,
};
+/* Core Release Register (CREL) */
+#define CRR_REL_MASK 0xfff
+#define CRR_REL_SHIFT 20
+
/* Fast Bit Timing & Prescaler Register (FBTP) */
#define FBTR_FBRP_MASK 0x1f
#define FBTR_FBRP_SHIFT 16
@@ -136,7 +140,7 @@ enum m_can_mram_cfg {
#define CCCR_INIT BIT(0)
#define CCCR_CANFD 0x10
-/* Bit Timing & Prescaler Register (BTP) */
+/* Bit Timing & Prescaler Register (BTP) (M_CAN IP < 3.1.0) */
#define BTR_BRP_MASK 0x3ff
#define BTR_BRP_SHIFT 16
#define BTR_TSEG1_SHIFT 8
@@ -146,6 +150,16 @@ enum m_can_mram_cfg {
#define BTR_SJW_SHIFT 0
#define BTR_SJW_MASK 0xf
+/* Nominal Bit Timing & Prescaler Register (NBTP) (M_CAN IP >= 3.1.0) */
+#define NBTR_SJW_SHIFT 25
+#define NBTR_SJW_MASK (0x7f << NBTR_SJW_SHIFT)
+#define NBTR_BRP_SHIFT 16
+#define NBTR_BRP_MASK (0x3ff << NBTR_BRP_SHIFT)
+#define NBTR_TSEG1_SHIFT 8
+#define NBTR_TSEG1_MASK (0xff << NBTR_TSEG1_SHIFT)
+#define NBTR_TSEG2_SHIFT 0
+#define NBTR_TSEG2_MASK (0x7f << NBTR_TSEG2_SHIFT)
+
/* Error Counter Register(ECR) */
#define ECR_RP BIT(15)
#define ECR_REC_SHIFT 8
@@ -200,6 +214,9 @@ enum m_can_mram_cfg {
IR_RF1L | IR_RF0L)
#define IR_ERR_ALL (IR_ERR_STATE | IR_ERR_BUS)
+/* Core Version */
+#define M_CAN_COREREL_3_1_0 0x310
+
/* Interrupt Line Select (ILS) */
#define ILS_ALL_INT0 0x0
#define ILS_ALL_INT1 0xFFFFFFFF
@@ -357,6 +374,13 @@ static inline void m_can_disable_all_interrupts(const
struct m_can_priv *priv)
m_can_write(priv, M_CAN_ILE, 0x0);
}
+static inline int m_can_read_core_rev(const struct m_can_priv *priv)
+{
+ u32 reg = m_can_read(priv, M_CAN_CREL);
+
+ return ((reg >> CRR_REL_SHIFT) & CRR_REL_MASK);
+}
+
static void m_can_read_fifo(struct net_device *dev, u32 rxfs)
{
struct net_device_stats *stats = &dev->stats;
@@ -811,8 +835,16 @@ static int m_can_set_bittiming(struct net_device *dev)
sjw = bt->sjw - 1;
tseg1 = bt->prop_seg + bt->phase_seg1 - 1;
tseg2 = bt->phase_seg2 - 1;
- reg_btp = (brp << BTR_BRP_SHIFT) | (sjw << BTR_SJW_SHIFT) |
- (tseg1 << BTR_TSEG1_SHIFT) | (tseg2 << BTR_TSEG2_SHIFT);
+
+ if (m_can_read_core_rev(priv) < M_CAN_COREREL_3_1_0)
+ reg_btp = (brp << BTR_BRP_SHIFT) | (sjw << BTR_SJW_SHIFT) |
+ (tseg1 << BTR_TSEG1_SHIFT) |
+ (tseg2 << BTR_TSEG2_SHIFT);
+ else
+ reg_btp = (brp << NBTR_BRP_SHIFT) | (sjw << NBTR_SJW_SHIFT) |
+ (tseg1 << NBTR_TSEG1_SHIFT) |
+ (tseg2 << NBTR_TSEG2_SHIFT);
+
m_can_write(priv, M_CAN_BTP, reg_btp);
if (priv->can.ctrlmode & CAN_CTRLMODE_FD) {
--
2.9.3
