Hi Stephen, This patchset extends pedit to support modifying a field in an offset relative to the conventional network headers (kenrel support was added [1] in 4.11 rc1). Without the extended pedit, user could specify fields in TCP and ICMP headers, but the kernel code was using an offset relative to the begining of the IP header. This will break if IP header length is greater than the minimal value of 20, or if L3 is not IPv4.
It also introduces support in manipulating ETH, TCP, UDP and IP.ttl fields and a new command to increase/decrease the value of a field (current use case is IP.ttl). Since there might be deployments already using pedit, special consideration was taken, not to break those scripts - only by specifying the special keyword 'ex', the extended capabilities are available, thus there should be no impact on existing scripts. Also, the new code can live together with rules added by the old code. It supports both the old netlink and the new one. This patchset is against the master and not net-next as the functionality was added in 4.11 Thanks, Amir [1] - 71d0ed7079df ("net/act_pedit: Support using offset relative to the conventional network headers") Amir Vadai (7): tc/pedit: Fix a typo in pedit usage message tc/pedit: Extend pedit to specify offset relative to mac/transport headers tc/pedit: Introduce 'add' operation tc/pedit: p_ip: introduce editing ttl header tc/pedit: Support fields bigger than 32 bits tc/pedit: p_eth: ETH header editor tc/pedit: p_tcp: introduce pedit tcp support Or Gerlitz (1): tc/pedit: p_udp: introduce pedit udp support man/man8/tc-pedit.8 | 126 +++++++++++++++++++++-- tc/Makefile | 1 + tc/m_pedit.c | 290 ++++++++++++++++++++++++++++++++++++++++++++++------ tc/m_pedit.h | 44 ++++++-- tc/p_eth.c | 72 +++++++++++++ tc/p_icmp.c | 3 +- tc/p_ip.c | 21 +++- tc/p_tcp.c | 40 +++++++- tc/p_udp.c | 30 +++++- 9 files changed, 572 insertions(+), 55 deletions(-) create mode 100644 tc/p_eth.c -- 2.12.0