On 05/23/2017 08:49 AM, Andrew Lunn wrote: > The 88m1101 has an errata when configuring autoneg. However, it was > being applied to many other Marvell PHYs as well. Limit its scope to > just the 88m1101. > > Fixes: 76884679c644 ("phylib: Add support for Marvell 88e1111S and 88e1145") > Reported-by: Daniel Walker <danie...@cisco.com> > Signed-off-by: Andrew Lunn <and...@lunn.ch> > Acked-by: Harini Katakam <hari...@xilinx.com>
Reviewed-by: Florian Fainelli <f.faine...@gmail.com> it would be great to be put proper defines (at least for the registers) for what this work around accomplishes, anyone with the datasheet? > --- > > v3: Rebase onto net. > > drivers/net/phy/marvell.c | 66 ++++++++++++++++++++++++++--------------------- > 1 file changed, 37 insertions(+), 29 deletions(-) > > diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c > index 272b051a0199..9097e42bec2e 100644 > --- a/drivers/net/phy/marvell.c > +++ b/drivers/net/phy/marvell.c > @@ -255,34 +255,6 @@ static int marvell_config_aneg(struct phy_device *phydev) > { > int err; > > - /* The Marvell PHY has an errata which requires > - * that certain registers get written in order > - * to restart autonegotiation */ > - err = phy_write(phydev, MII_BMCR, BMCR_RESET); > - > - if (err < 0) > - return err; > - > - err = phy_write(phydev, 0x1d, 0x1f); > - if (err < 0) > - return err; > - > - err = phy_write(phydev, 0x1e, 0x200c); > - if (err < 0) > - return err; > - > - err = phy_write(phydev, 0x1d, 0x5); > - if (err < 0) > - return err; > - > - err = phy_write(phydev, 0x1e, 0); > - if (err < 0) > - return err; > - > - err = phy_write(phydev, 0x1e, 0x100); > - if (err < 0) > - return err; > - > err = marvell_set_polarity(phydev, phydev->mdix_ctrl); > if (err < 0) > return err; > @@ -316,6 +288,42 @@ static int marvell_config_aneg(struct phy_device *phydev) > return 0; > } > > +static int m88e1101_config_aneg(struct phy_device *phydev) > +{ > + int err; > + > + /* This Marvell PHY has an errata which requires > + * that certain registers get written in order > + * to restart autonegotiation > + */ > + err = phy_write(phydev, MII_BMCR, BMCR_RESET); > + > + if (err < 0) > + return err; > + > + err = phy_write(phydev, 0x1d, 0x1f); > + if (err < 0) > + return err; > + > + err = phy_write(phydev, 0x1e, 0x200c); > + if (err < 0) > + return err; > + > + err = phy_write(phydev, 0x1d, 0x5); > + if (err < 0) > + return err; > + > + err = phy_write(phydev, 0x1e, 0); > + if (err < 0) > + return err; > + > + err = phy_write(phydev, 0x1e, 0x100); > + if (err < 0) > + return err; > + > + return marvell_config_aneg(phydev); > +} > + > static int m88e1111_config_aneg(struct phy_device *phydev) > { > int err; > @@ -1892,7 +1900,7 @@ static struct phy_driver marvell_drivers[] = { > .flags = PHY_HAS_INTERRUPT, > .probe = marvell_probe, > .config_init = &marvell_config_init, > - .config_aneg = &marvell_config_aneg, > + .config_aneg = &m88e1101_config_aneg, > .read_status = &genphy_read_status, > .ack_interrupt = &marvell_ack_interrupt, > .config_intr = &marvell_config_intr, > -- Florian