From: Bogdan Purcareata <bogdan.purcare...@nxp.com> Date: Mon, 29 May 2017 09:11:29 +0000
> So far, the Cortina family phys (CS4340 in this particular case) are only > supported in fixed link mode (via fixed_phy_register). The generic 10G > phy driver does not work well with the phylib state machine, when the phy > is registered via of_phy_connect. This prohibits the user from describing the > phy nodes in the device tree. > > In order to support this scenario, and to properly describe the board > device tree, add a minimal Cortina driver that reads the status from the > right register. With the generic 10G C45 driver, the kernel will print > messages like: > [ 0.226521] mdio_bus 8b96000: Error while reading PHY16 reg at 1.6 > [ 0.232780] mdio_bus 8b96000: Error while reading PHY16 reg at 1.5 ... Series applied, thanks.
