From: Thor Thayer <thor.tha...@linux.intel.com>

Fix NETDEV WATCHDOG timeout on startup by adding missing register
writes that properly setup SGMII.

Signed-off-by: Thor Thayer <thor.tha...@linux.intel.com>
---
 drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c 
b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c
index 489ef14..6a9c954 100644
--- a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c
@@ -37,6 +37,7 @@
 #define TSE_PCS_CONTROL_AN_EN_MASK                     BIT(12)
 #define TSE_PCS_CONTROL_REG                            0x00
 #define TSE_PCS_CONTROL_RESTART_AN_MASK                        BIT(9)
+#define TSE_PCS_CTRL_AUTONEG_SGMII                     0x1140
 #define TSE_PCS_IF_MODE_REG                            0x28
 #define TSE_PCS_LINK_TIMER_0_REG                       0x24
 #define TSE_PCS_LINK_TIMER_1_REG                       0x26
@@ -65,6 +66,7 @@
 #define TSE_PCS_SW_RESET_TIMEOUT                       100
 #define TSE_PCS_USE_SGMII_AN_MASK                      BIT(1)
 #define TSE_PCS_USE_SGMII_ENA                          BIT(0)
+#define TSE_PCS_IF_USE_SGMII                           0x03
 
 #define SGMII_ADAPTER_CTRL_REG                         0x00
 #define SGMII_ADAPTER_DISABLE                          0x0001
@@ -101,7 +103,9 @@ int tse_pcs_init(void __iomem *base, struct tse_pcs *pcs)
 {
        int ret = 0;
 
-       writew(TSE_PCS_USE_SGMII_ENA, base + TSE_PCS_IF_MODE_REG);
+       writew(TSE_PCS_IF_USE_SGMII, base + TSE_PCS_IF_MODE_REG);
+
+       writew(TSE_PCS_CTRL_AUTONEG_SGMII, base + TSE_PCS_CONTROL_REG);
 
        writew(TSE_PCS_SGMII_LINK_TIMER_0, base + TSE_PCS_LINK_TIMER_0_REG);
        writew(TSE_PCS_SGMII_LINK_TIMER_1, base + TSE_PCS_LINK_TIMER_1_REG);
-- 
2.7.4

Reply via email to